Range Rover Classic - Replacement for Part MXC1306

R

RangeRover3D

New Member

Posts

3

• Aug 21, 2025

• #1

Hey everyone – I’m bringing quality 3D-printed Range Rover Classic replacement parts to the community, at a fraction of OEM prices. If you’re after door pull handles in various colours (tan, grey, etc.), check out my Etsy shop: https://www.etsy.com/uk/shop/RangeRover3D. I test printed each design for perfect fit and durability, and print with PLA filament for strength and welcome feedback, custom colours, and fitment reports. Let me know here or DM me and I’ll get you sorted. The vehicle range that these parts fit for is the 1987 - 1995 model of Range Rover.

 

Attachments

• 
  Screenshot_20250820-184916.png

  2.2 MB · Views: 41

Mark Piercy

Well fumbled member....

Full Member

Posts

13,993

Location

Sud ouest France !

• Aug 21, 2025

• #2

Very cool. How about P38 bits?

 

backinblack

Well-Known Member

Full Member

Posts

6,911

Location

North Manchester

• Aug 22, 2025

• #3

Are you charging for the item or the file to print your own?
Also I have found PLA can deform in hot vehicles so prefer to use ABS. Have you tested it?

 

R

RangeRover3D

New Member

Posts

3

• Aug 22, 2025

• #4

backinblack said:

Are you charging for the item or the file to print your own?
Also I have found PLA can deform in hot vehicles so prefer to use ABS. Have you tested it?

Click to expand...

I have been annealing the PLA parts to increase the resistance to warping and make the parts more solid in general. This is done at a slightly lower temperature than normal though so guidance says it should hold up to about 80'c

 

backinblack

Well-Known Member

Full Member

Posts

6,911

Location

North Manchester

• Aug 22, 2025

• #5

Interesting hadn't heard of that process, must give it a try.

 

backinblack

Well-Known Member

Full Member

Posts

6,911

Location

North Manchester

• Aug 26, 2025

• #6

This looks like the same part if anyone wants to print their own.

Asa Range Rover by MrProper

Asa para Range Rover, diseño modificando los puntos de rotura habituales. Mas espesor de capa y mas refuerzo.Para su impresion no es necesario soporte alguno, por mucho que lo pida el fileteador.Range Rover handle, design modifying the usual break points. More layer thickness and more...

www.thingiverse.com

 

R

RangeRover3D

New Member

Posts

3

• Aug 26, 2025

• #7

I tried that part actually, dimensions are really off with the angle of the top rim. When I tested it the fitment wasn't as secure as I would have liked so I modelled my own version but altered to curve the other way so when you pull it, it pulls against the supporting metal and not nothing and reinforced the screw holes at the bottom as they commonly crack too.