New Owner 99 P38 2.5❤️

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

Irishss

New Member
Posts
5
New owner p38 Diesel, loving the vehicle.

Having a long crank issue to start.

Changed glow plugs, fuel filter, and fuel pipes to injectors.
Once started runs nice.

I did notice a few bubbles in clear pipe from filter.

Any help appreciated
 
New owner p38 Diesel, loving the vehicle.

Having a long crank issue to start.

Changed glow plugs, fuel filter, and fuel pipes to injectors.
Once started runs nice.

I did notice a few bubbles in clear pipe from filter.

Any help appreciated
Check the leak off pipes, see if there is any diesel in the wells around the injectors, they are a regular failure item or is that what your have done when you say "changed fuel pipes"? Have you checked the voltage at the glow plugs?
Another common cause of poor starting is the FIP timing which needs diagnostics to check.
Welcome to the madhouse.
 
Check the leak off pipes, see if there is any diesel in the wells around the injectors, they are a regular failure item or is that what your have done when you say "changed fuel pipes"? Have you checked the voltage at the glow plugs?
Another common cause of poor starting is the FIP timing which needs diagnostics to check.
Welcome to the madhouse.
Hello, I did notice diesel in wells and changed the leak off pipes..

Will any OBD plug in?
Cheers
 
Update

I went to drop the tank but I decided to lift the back seat.
I found a cut in the floor.
Someone had went at it..

So I continued to remove sender..
The 2 nuts were a nitemare to remove, they were in bad shape..
I got them wit a lot of cleaning and penetrating oil..I took my time and worked them loose.

Test pump nothing…the pump would only work if I tapped it with a light hammer..

So new pump on the way..

So guys before dropping tank

Look under seat..
 
Update

I went to drop the tank but I decided to lift the back seat.
I found a cut in the floor.
Someone had went at it..

So I continued to remove sender..
The 2 nuts were a nitemare to remove, they were in bad shape..
I got them wit a lot of cleaning and penetrating oil..I took my time and worked them loose.

Test pump nothing…the pump would only work if I tapped it with a light hammer..

So new pump on the way..

So guys before dropping tank

Look under seat..
What make of pump did you order? 😳
Don't say britpart 🫣
 
Back
Top