landymon
Member
- Posts
- 26
- Location
- Monmouthshire
Trying to replace both the wishbones.
The famous bolt problem as cannot remove the one bolt because of rusted bolt in the bush.
Seen its advised to use a hacksaw blade to cut the bolt for removing the arm. Is there any reason why a angle grinder cannot be used instead using a thin metal cutting disc being alot easier.??
The famous bolt problem as cannot remove the one bolt because of rusted bolt in the bush.
Seen its advised to use a hacksaw blade to cut the bolt for removing the arm. Is there any reason why a angle grinder cannot be used instead using a thin metal cutting disc being alot easier.??
