P38A Overheating

Datatek · Thursday at 16:29

RangeRoller dt said:
Best thing worked for me with bleeding was put couple blocks under the FR wheel get the expansion tank up high.
Is everything checked to be tight after the work and a run in? Loose jubilee or something will draw air in

Yep, I always raise the front to refill the system.

RangeRoller dt · Thursday at 17:13

Datatek said:
Yep, I always raise the front to refill the system.

Yip, was you showed me that one

aj1954 · Thursday at 17:49

Datatek said:
Proper Jubilee clips are fine, the modern ones with punched out teeth are crap.

I didn't like tension clips until, I got the tool to release them, the cable type for difficult to access ones.

kermit_rr · Thursday at 19:55

Datatek said:
Proper Jubilee clips are fine, the modern ones with punched out teeth are crap.

The problem i have is that they bend slightly at the far end of the screw unless you have exactly the right size.. then you have a small section with less/no compression

P38A Overheating

Datatek

Well-Known Member

RangeRoller dt

Well-Sprung Member

aj1954

Well-Known Member

kermit_rr

Very

Similar threads