Diesel Fuel compensation MM3

I've been running live data on my Face-lift L314 Td4

Fuel compensation is showing the following reading
Injector 1 14.58mm3
Injector 2 8.54mm3
Injector 3 14.50mm3
Injector 4 13.68mm3

I'm using Launch X431 V2.0 for landrover. Some information found states my injectors should be reading around 2mm3. Can someone confirm if these readings are ok?

Changed the following
Mass Airflow sensor
Cam Position Sensor
Fuel Pressure Switch (at the end of fuel rail)
Full Service carried out
Injectors removed and cleaned
ESSO Diesel being used (No idea if this makes a difference)
Diesel Injector Cleaner used

Hi,

You should do a fuel return test.
Certainly the injectors are dead, cleaning injectors won’t help.

When you had the injectors removed, you put them in the same place ?

More than 2 mm3 fuel compensation is too much.

Regards

Injectors have been recoded to each cylinder.

No coding needed for your vehicle. Hope you didn't pay anything for it !!

Do a leak back test, get one of these.


Then maybe these would be a good buy ? nowt to do with me I'm not the seller, make an offer if end up needing any