mick dodd
Active Member
- Posts
- 106
- Location
- st asaph denbighshire
Got a new sender marine type 190ohm at top 1ohm at bottom but the smiths gauge goes up on 1ohm & down on 190 ohm some one know what to do ?
dodgy fuel gauge
- Thread starter mick dodd
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Rangieman123
Active Member
- Posts
- 69
- Location
- Dublin, Ireland
Bend the arm at the sender end 180 degrees and bolt it back into the tank " the other way round".
I've done this before. You can solder on some extra material if you can find an old wire coat hanger.
I've done this before. You can solder on some extra material if you can find an old wire coat hanger.
Rangieman123
Active Member
- Posts
- 69
- Location
- Dublin, Ireland
It fools the sender into working in the opposite way.
mick dodd
Active Member
- Posts
- 106
- Location
- st asaph denbighshire
no its a slide up a pole type ! thanks for the reply
