Recent content by WJBDesign

Thank you. It’s only recently had an oil change so I’d rather not do it again if possible. But if that’s the only way I can be sure then that’s what I’ll have to do. I was hoping someone might be able to put a tape measure on one…

Hello. The dipstick tube on my Defender 200tdi has become loose and can be pushed into the sump and pulled back out quite easily. In order to get an accurate oil level reading I need to work out the correct length the tube should be. Google AI seems to think it should be 29.5cm from the bottom...

Hi, Another question for you knowledgeable lot; I want to get some mudflaps for the 130 but can't find any rear ones which are listed as suitable, I assume the 110 ones are fine for the front but wanted some advice on which to get for the rear and whether a certain bracket is required? Many...

Yep, thanks, fitted it tonight; all good!

Great, thanks for the help; the exploded diagram was just what I needed, looking at that it seems the part I need is MUC2440, the reinforcing plates etc are still attached to the bonnet which is why I wanted to keep it all on and just find the missing part! Only going to cost around a tenner too...

Not much help if I don't know what I'm searching for! There seem to be several different types of mount; all with different configurations of fixing bolts!

Hello, I've recently purchased my first Landy, it's a 1989 130 Crew Cab HCPU and is a bit of a project although it really just needs smartening up. The question I have is whether anyone either has or recognises the spare wheel mount which came with the vehicle (see attached picture) The holes...