Varks74's latest activity

cheers for that bud, it makes it better to have someone who knows the system to bounce ideas off of, the SDD diagnostic software i ordered arrived yesterday and i have set it up on my laptop now, so will get everything connected later and see if...

well, i spent a few hours on it yesterday, ripped everything out the back compartment, checked that the optical cables to the touch screen were oriented the correct way, they were, i checked the cables to the power supply plug to the screen...

So, the plot thickens, I have checked the fibre optics, made sure they are orientated the correct way, I stripped everything out of the back and switched the car on, I still get no signal in the back unless I bypass the touch screen, I’m going...

Cheers for all your help buddy, i will see how i get on and will let you know if its a happy face or sad face lol

I will try and get some time later to double check the in and out optics to make sure they are in the right orientation, I've lost track of what i have done so far, i will put the bypass loop on the rear connector with the rest of the rear...

No bud, no signs of life on the screen at all, the only thing i now get, since replacing the IHU is the flashing orange light on the power button,

just re-read your reply, yes, if i loop the screen, then i get signal to the rear, i might just put the old Amp back in, as i wasn't sure if the amp is also hard wired to the screen, so if it's faulty maybe it's not allowing the optical signal...

I've not tried that as i have no signal getting to the rear (disconnected the white wrapped optical harness from the female connector as it enters the rear compartment, no signal there if the touch screen is connected,

I did find this online, it was an AI answer to whether a faulty amp would still allow an optical signal to the rear modules, but it would explain my issue: No, with a faulty amplifier (amp) in an L322 Range Rover, the optical signal may not reach...

kds, i've not got an optical signal getting to the back at the moment, so struggling to see that anything in the rear would be causing the issue, First job when i get the chance is to check the screen is getting the correct power at the correct...

I will check the power supply to the screen this evening and post up the results, thanks for your input buddy, much appreciated, just hope i find something wrong,

is there a specific order the loop goes in? I was working off the assumption that the IHU is where the signal originates, then it goes to the touch screen, after that i thought it went to the cd player, i do get a light at the cd player if i...

Looking at the diagram you sent through, i may need to try something else, i don't think i looked at the connector in the back once i connected the screen as i was lead to believe that the CD player was next in line after the screen, so will...

backinblack, cheers for the info bud, yeah i used a loop for the connector that plugs into the touch screen, that enables me to get the red led at the connector for the cd player, if i don't use the loop and plug it into the touch screen as...

Hi all, been chasing a blank screen issue on my 2007 L322, initially i had no power at all and no blinking power button light, I solved that with a new IHU, now i get the flashing light but nothing else, I have tried 3 screens and get the...