UpandOver's latest activity

It’s started again .. my neighbor’s must think that the misses is having an affair with Simon the DPD delivery driver 😂 as hes starting to spend more time in the house than I do

Axles off and being prepared for some new bracketry courtesy of YRM, thanks guys and gals you certainly manufacture some gucci stainless Landy parts, at very competitive prices and to top it all off their next day delivery service it’s actually...

Chassis all cleaned up and ready for painting with epoxy 2pk Jotamastic 85 primer and Hardtop XP topcoat

Not bad. Chassis looks spotless bro.

Tomorrows jobs is to finish cleaning the chassis, remove back axle and remove diff pans.

With the rear axle still attached I wheeled the chassis to the garden and gave it a good hot water jet wash, then degreasing with trailer wash. Fishied off giving it a once over with 80grit flap disc as I think its the original chassis thats...

Well there’s been some progress, took a day off on Friday to catch up 😃 front axle off, disassembled and casing cleaned but it does require a new diff pan as its very dented.

Engine and box is out, degreaed and cleaned ready to split. Will clean and paint the block and head, change the timing belt, water pump, lift pump and check the tapet clearances an oil change and she’s good to go back in along with a new clutch...

Now its ready for engine and box to be removed. So I’ve splashed out an bought myself a new 2T engine crane ! Enough with begging and borrowing time to bite the bullet.

Its a galvanized chassis so as you say a good clean, degrease, prime and paint and it will survive another 40 years plus. I’m keeping it as original as possible being the purist that I am however I may select a few chosen upgrades along the lines...

Despite a blistering start progress had seem to have slowed down during the past week, but this weekend has seen all of the body panels removed to reveal moor tin worm. Ah hang on a minute I forgot to put on my rose tinted safety specs on…… thats...

Hi Phill Yes keswick green, sand coloured soft top and black wheels

This evenings tinkering consisted of removing the front end and tackling the left wing, forgot how many bolts hold them on and every one of them was rusted solid, Who would belief it ! 😂

Now thats what I call progress

Progress report, despite it being a day of rest the bloody cat “Hector” made sure I was up at 4.45am ! Convinced he was as keen as me to get out of bed and into the garage I later found out that Mrs Hughes has locked the cat flap while cleaning...

As the proud and happy owner of Mr H's previous resto, christened 'Little Blue', I'll be following with interest! 150 faultless miles across Wales yesterday, and still smiling.

Inspiration right there !

Ah you’ll bring that old thing around no bother….lot of satisfaction waiting to happen there…great Land Rover that…I’d do it again too. Here’s a photo of my old 90. It looked beyond redemption before I started it. Folk laughed at me and told me...

Just dont look too closely to the 20mm of filler peeling off the front wing 😂 Im still wearing my rose tinted safety glasses

a few hours in and progress is definitely being achieved, think I should celebrate with a beer 🍺

Day 1, empty the ton of spares, parts, wheels, roll bar hoops, pedal boxes, engine bits out of the back… cut the canvas off and reveal the inner beauty.. oh hang on Ive still got my rose tinted glasses on

Well if it wasn’t for the singer sowing machine sounding engine going past each morning I wouldn’t have given her a second look, beauty is in the eye of the beholder they say and in this instance … well a picture tells a thousand words

Each day while working at RAF valley I saw this tired looking def zooming past the workshop at approximately 7.45 every morning, used as a daily driver and having spent many a happy year or should I say century green lane’in with the family the...