tyregeezer's latest activity

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
  • tyregeezer
    Saga continues done a few miles today, drives fine, no lights, tonight used it for work when I knocked off had immediate aed and stability not available, no loss of power or effect of any kind well noticeably, turn it off and back on all good...
    • 20250311_223230.jpg
  • tyregeezer
    Do have block needs hone or rebore rods and crank As said above cheaper to buy s type, change belts and oil pump and all your discovery bits
  • tyregeezer
    Brake light switch turned up late yesterday managed to fit it but is a fiddly little thing This morning set my camera to watch turbo actuator as was very sluggish shouldn't have worried, power back no gongs no fault codes apart from camera, drove...
    • 17415342664199199203558458217336.jpg
  • tyregeezer
    Yes mate thanks for you help and information always appreciated but still wish you were here, definitely have to replace brake light switch as first action, have removed it it's very stiff and gritty new one should then narrow down codes or...
    • 17413475976037869477085435066207.jpg
  • tyregeezer
    tyregeezer reacted to gstuart's post in the thread Discovery 4 Sdv6 engine removal with Like Like.
    Did find this as well for u ref the red brake light showing if is if appears, of course may not be relative but just in case as it can also sometimes keep that red light on Fingers crossed it’s just a faulty brake light switch and nothing else...
  • tyregeezer
    tyregeezer reacted to gstuart's post in the thread Discovery 4 Sdv6 engine removal with Like Like.
    Great news mate ur making progress through the DS I wonder if they tried to disable the egr by unplugging it Maybe the dpf is blocked so they u, assume the live data will help in telling u the live readings of both sensors either side of the...
  • tyregeezer
    Reading up this morning on brake light switch seems it can cause a multitude of issues and on this model is also part of speed limitation so ordered one different to D3 keeping fingers crossed but brake lights are permanently on so hopefully...
    • 17412610939365623597613154555045.jpg
    • 17412611288163154736361767563375.jpg
  • tyregeezer
    Changed fluid today see color not light green lifeguard got about 3L out and in used 300ml syringe Reset to factory default, took force spin is better smoother but codes pinged back hdc abs etc Thinking at this point it Lan based issue rather...
    • 20250305_131154.jpg
  • tyregeezer
    Back on D3 motor Sunday fitted new belts, removed loom, and egrs ready for switch over Starting on switch over at weekend probably Yesterday haldex came fitted and refilled oil and changed oil too, recalibrated and bled system with diagnostic...
    • 20250302_140710.jpg
    • 20250302_141327.jpg
    • 20250301_134310.jpg
    • 20250302_140649.jpg
  • tyregeezer
    terrafirma discs, toyed with brembos but unsure of transmission costs, but will most likely use them on my sdv6, have standard size brembos and ebc pads on my 2.7
  • tyregeezer
    tyregeezer reacted to faulksy's post in the thread Discovery 4 Sdv6 engine removal with Like Like.
    i fitted these discs all round on my sdv6. awsome bit noisey though. going with yellow suff next and brembo 4 pot calipers apparently quieter ???
  • tyregeezer
    Put sport on stands today and removed the haldex was about 50% clogged sludge no chunks put a multi meter on ohms should be 5-8 ohms I believe this one reads 11.8 so I'm thinking at this point pump is long gone, so ordered oem today Looked at...
    • 20250301_133248.jpg
    • 20250301_134310.jpg
  • tyregeezer
    Interesting journey to work and back drove starts and drives fine, for about two miles the you can feel a strange resistance from the wheels accompanied by hdc not available and aed not available I think didn't have glasses then two wheel drive...
  • tyregeezer
    tyregeezer reacted to gstuart's post in the thread down and out disco 3 with Like Like.
    Plus 1 what’s already been said May I plse also add that seeing u replaced the front lower arms to ensure a full 4 x wheel alignment has been done , ur steering wheel angle sensor checked to ensure it’s correct Then ensure the MAP sensor is...
  • tyregeezer
    tyregeezer reacted to Firebobby1's post in the thread Discovery 4 Sdv6 engine removal with Like Like.
    My mate found out after driving his sport about 100 miles and noticed the hot smell of brakes. It cost him a fortune to sort out, I'm sure you will sort it for a lot less 👍
  • tyregeezer
    tyregeezer reacted to gstuart's post in the thread Discovery 4 Sdv6 engine removal with Like Like.
    Doing a sterling job as always mate , I’ll check those codes for u in some of the many bookmarks I’ve collated over the years Enclosed some pics of the brake I got , very pleased with them , along with of course changing all the brake fluid with...
  • tyregeezer
    tyregeezer reacted to gstuart's post in the thread Discovery 4 Sdv6 engine removal with Like Like.
    As a side note a few pics I found about specs , wheels , dimensions etc which I hope is useful to u
  • tyregeezer
    tyregeezer reacted to gstuart's post in the thread Discovery 4 Sdv6 engine removal with Like Like.
  • tyregeezer
    tyregeezer reacted to gstuart's post in the thread Discovery 4 Sdv6 engine removal with Like Like.
    Apologises if you’ve already seen this but looks like the canbus 60 ohms test is required to check the high and low canbus circuit
  • tyregeezer
    tyregeezer reacted to gstuart's post in the thread Discovery 4 Sdv6 engine removal with Like Like.
    Finally managed to find the actual name of the gearbox ZF 9HP48 9-speed automatic transmission, seems the oil and filter change as per usual are different from JLR
  • tyregeezer
    tyregeezer reacted to gstuart's post in the thread Discovery 4 Sdv6 engine removal with Like Like.
    In the first years of production, owners often complained about inappropriate shifting and even an involuntary transition to neutral. But subsequent firmwares fixed this. With rare oil changes, the valve body solenoids quickly become clogged with...
  • tyregeezer
    Started on tdv6 then it stopped raining so moved on to sport brakes, seemed quite straightforward as the fronts lots of rust and muck good clean up and pistons pushed back easily, handbrake pistons sit back beyond hydraulic pistons in service...
    • 20250226_162847.jpg
    • 20250226_162916.jpg
    • 20250226_173214.jpg
  • tyregeezer
    Thanks mate your a star will go through the information you sent, its always the finding of information i find most difficult bless you sure I'll be pestering you to clarify bits for me Lol 7mm allen key turned up so can get on with brakes later...
  • tyregeezer
    Think you were spot on @Firebobby1 handbrake diagnostic twice said not satisfied third time heard the motors run, got a successful message checked and pistons are indeed retracted I reckon they were indeed a little stuck all the best
  • tyregeezer
    Fitted front brakes this morning all went ok nothing seemed particularly seized all cleaned up and looks much better Was going to fit rears but 9mm allen key never turned up, took three attempts to put park brake into service mode, may have...
    • 20250224_155905.jpg
  • tyregeezer
    tyregeezer reacted to gstuart's post in the thread Discovery 4 Sdv6 engine removal with Like Like.
    Awesome mate that you’ve made a lot of progress and indeed also seen some of the wiring diagrams and was also taken badk how much was fitted to a simple hatch 🤣 See what u mean about service kits for the 9 x speed gearbox Did find some atf oil...
  • tyregeezer
    Bless you mate think I have found a sump will get you to check it out before I buy Yes I bought the same discs as you had ceramic rears but ebc front sorry for copying Lol if they were good enough for you Was too cold today decided to leave...
    • 17403175011958234548332028798908.jpg
  • tyregeezer
    Tailgate today still waiting for brakes turned up at 4 this afternoon Removed the panel, struts and latch loosened the top two 13mm bolts both were loose and moved the hinges back to their paint marks bit of fettling (about an hour) and lined up...
    • 20250222_162259.jpg
    • 20250222_120928.jpg
    • 20250222_120917.jpg
    • 20250222_120609.jpg
    • 20250222_120552.jpg
  • tyregeezer
    tyregeezer reacted to Firebobby1's post in the thread Discovery 4 Sdv6 engine removal with Like Like.
    My mate had the same thing with his RR sport, it was the EPB binding.
  • tyregeezer
    Thanks will check it out too, local garage owe me a favor or two so may get a lesson on epb calipers too, new brakes and pads on the way
Back
Top