steve2286w's latest activity

Looks worth a punt

https://www.lr-winches.com/Parts/Winches/Mechanical_Capstan_Winches/product/749/Fairey-Wheel-Chocks-Ground-Anchor-Set if you find this useful perhaps you can make me a set too

I'll try that. Thank you 🙏

Spider hand press-ups helped with mine … match up fingers and thumbs on each hand and press together

I tried string first of all last weekend. Total failure, weird, because that was always my go to method with windscreens. Bought a tool kit and it made the job possible. Just!. That said, the angle I was working at played hell with my carpel...

And string.?

Hi, check the al the boost hoses especially to not have a loosen clamp or a crack cos it seems there is a slight boost leak otherwise the readings are within limits it doesnt seem a management issue, check the intercooler too it should have...

https://www.google.com/search?client=firefox-b-d&q=is+dropbox+virus+free I think you could take a screenshot and post that as an attached picture .... ?

I think you will find that weld is nowhere near the cooling jacket and the block has cracked as something has let go in the bottom end in the past.

Hi that’s fantastic thanks very much most helpful

Thank you 👍

Looking good, above the bumper mine is, but don’t have reversing light, want to make sure wiring comes into the little covers inside tub

Check that the little wire from ignition switch to the starter solenoid is not live all the time due to ignition switch or wire fault.

http://smithies.co.nz/land_rover/ S3 parts catalog and more

Did it actually turn the engine over when you tried to start it. Worth cleaning up all live and earth connections on engine, chassis starter and solenoid to shiny bright. Can you remove solenoid, disassemble, clean and bench test