More electronics = more to go wrong in my experience. The rear sensors on both my P38's are original and still working fine after 25+ years, the fronts were replaced 14 years ago on one and about 6 years ago on the other one so hardly...
You could find one with a good rad and keep this one as donor. If no MOT Itl be laid up anyhow? Just depends on your personal preference.
I would mention you should ask the boys here what happens when you go down the rabbit hole of scrapper...
Busy developing new height sensors with my brother. The sensor itself is a non contact hall effect potentiometer. So no little wiper arms to wear out. The new sensors are going to be paired with a control PCB that lets them interface to the...
Definitely too many faults reported. Cannot believe two airbags & two crash sensors have all failed ?? As above check the diagnostic connector for corrosion.
Also check the SRS Bulbs in the cluster. There are usually two, & if one fails...
Today way better: The indicator lights, fog light, front and tail lights, warning flasher, they all work. Indocator lights were tricky, the frint right hand one had weird wiring issues... Luckily, I had some spares!
The tailgate wiring is now...
Thanks for asking young lady. Wow.. I definitely won the lottery and a second chance to do things right.. The word happy doesn't get close to how I feel💝
+1^^^^ The pipes run along the top of the chassis left side, very close to the exhaust..
Remove the inlet filter from the compressor to prove it's sucking by applying you finger to the inlet.
Once you’ve come round a bit, realise the opportunity this presents and weigh up your options from here in ; Itl soon lift your spirits :vb-angel1:
Rest up Itl be fine.
I had an accident today with my p38, drove into someone else's back at around 30mph.
Front crossmember bent as he had a towbar
Is this the end of my range rover?
Front crossmember is part of the chassis and not bolt on so..