Rubberknees's latest activity

There are 3 bleed nipples on the master cylinder, one is hidden on RHD vehicles under the foam.

That was a super slippery hill. You can see in the terribly fimled decent video theres abit of a bump in the road and as my front wheels drop off they lose traction and from then on the ABS just decided no more brakes. I basically just plowed...

Wots an interceptor do?

Over here, there is a company called Colis Privé used by Amazon and others, there are 3 houses in our lane, they dump packages in the drive to the farm at the top of the hill whatever the address is.

Having 12 volts at the fuse is one thing, but have you actually checked if there is a blown fuse?

12.15v is very under 12.4 is considered a dead battery what are you getting at the battery.

I'm still waiting

You are lucky. 10 to 14 days round here

Round here they've cut back on staff on only deliver every 2 or 3 days depending where abouts you live. Special deliveries it's a guy running around in a van but normal 24/48 service can take 3 days.

Check the overflow pipe from the coolant tank in case it's pressurising and blowing out.

I find depends which part of the country you order from with Royal Mail.

Yodel are diabolical in my opinion

I'm glad that's not just me. Although Evri round here has sorted it's game out recently which is good. Yodel on the other hand.....

True very true. I try not to use sellers who use certain couriers if I can

Got to love "next day" delivery haven't you. Lately I'm getting parts from Estonia delivered faster than stuff bought in the UK.

Ball joint steering knuckles didn't get done Friday. Ball joints had arrived on time but not the shaft seals. it's a set back, now everything here will be done this week. These things are sent to try us :( :D

Definitely do not look. I was so concerned that I created an account here just to find out what it was. Thanks for your help.

Can buy printers quite cheap now. The first one i bout about 8 months ago for £80. This new one was £1300 but in my eyes it has been worth every penny. A lot of things I've made i couldn't buy or weren't suitable, so being able to design and...

Errr, pictures please 🤔😝

Today I have mostly been 3d printing replacement parts for the 322. Namely replacement studs for the scuttle panel and clip down points for the boot floor. Also 3d printed a instrument cluster mount to use a lcd panel and raspberry pi as the...

I don't miss doing that on my daily car but i think you get a better feel of what's going on when you actually interact with it

Engine oil and filter change on LHD P38 ready for the MOT. Still got to grease the UJ's, check the rear diff oil and air filter.

I'm done with LEDs more hassle than they are worth

Is something still holding it? With me driving a nammer hub would like like an 8ft sheet tin foil after a day 🤔 You got a bigger nammer?

Heat, welt the f!!!!!r, heat again. Patience and persistence 👍

Well done that man and thank you for listening 👌🤩👍

Best advice ever Mark, thank you. 3 hrs of googling and nothing conclusive. Some videos say you have to remove the rear seats and some say not but don’t show how. As you suggested I went out there and carefully peered behind carpets and...

And the verdict is in. . . . . . . T'was a wire fault. All now fixed 😁👍

i did that last time a right pain, the trailer is cheaper