RobertZ's latest activity

Hi, as some of you said, I couldn't find the hard plastic seals for the secondary pistons, I found a good used modulator from 1998 and took it. The part looks good and there is no dirt inside, I think I got a good deal. I removed the washers and...

I had the same code on mine. A combination of FIP out of timing and faulty actuator. Check the FIP cover position and the pump timing.

For the zebra strip, I was thinking to myself this morning... can you use any zebra strip🤔 but then you have done🤔👍

Hello everyone! I'll update you a bit with my work, I opened the actuator to clean the sludge from the coil and the tracks, I cut the 7 contacts. There was dirt between the coil and the stator that rotates with the actuator pin and the movement...

First double check the Fip timing is correct as per Rave. Then set the idle value at 128/129 with nanocom. Then you can try loosening the Fip cover screws (1/4 turn is enough) and tap gently the cover with a wood and a hammer to change the...

Spare parts are starting to arrive, I immediately compared the new chains with the old ones: here is the situation 30 years and 186,000 km later. I actually suspect it was changed because it has little stretch and there was putty in some places...

@Francesco M. Welcome to the self-harming club. Interesting color your P38, in Italy they are almost all gray or blue. Seems to be a DT, so rather basic setup (but with Hevac) without headlight wipers, sunroof and with fabric interior. I have...