Recent content by Pug957

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
  1. P

    P38A Nanocom code 1190 Oxygen Sensor Heater Circuit Low Resistance

    Low resistance is normally the heater coil inside the sensor fusing together. Very very rarely wiring or connector issues. New sensor of the correct specification should sort that code, and as said earlier, will function fine once warmed up by the exhaust gasses.
  2. P

    L322 Intermittent Siren Issue

    The siren in my Saab failed for dead batteries and just sounded off, usually at 3am or when driving past police cars. May have a look to see if I can buy a new one as they're often glued together.
  3. P

    L322 Intermittent Siren Issue

    I like the chirps/beeps when locking and unlocking, extra peace of mind the car does what i want it to. The keys were knackered when I bought the car and the fuse for the siren was pulled so it didn't sound when the previous owner got into the car using the key. I've since got new keys and want...
  4. P

    L322 Intermittent Siren Issue

    Hi guys. 2006 Vogue TD6 Bit of a strange one, got an intermittent siren issue. The siren sometimes beeps with the central locking and sounds off if I open the doors using the key. Other times it doesn't do anything. Anyone had this issue before? Checked fuses, wiring etc, everything seems...
  5. P

    L322 injector problems/tips

    You forgot the step ladder and scaffolding 😂
  6. P

    Average fuel

    Don't think my battery has stayed connected long enough up to now to register milage over a full tank, never mind a week.......
  7. P

    L322 injector problems/tips

    Being new to a TD6 myself, I didn't know about the airbox trick. Will keep that in mind for the next time I'm threatening to set fire to the truck. Thanks for the tip 😃
  8. P

    water pump broken bolt

    I second the left hand drill bits. I keep a decent stockpile of them for exactly this reason. If you get brass guides as well that can save the holes and threads of the block as they can help keep the drill centred. I'm lucky enough to have access to a lathe in work so make those when needed.
  9. P

    What did you do with your Range Rover today

    Today I finally got replacement under trays through the post, on they went to cover up the oil leaks. Can't see them, they're not there........
  10. P

    L322 TD6 no boost

    Looking at the engine from the front, the turbo is on the left of the engine. The pressure hose comes off the turbo and into the intercooler at the front bottom left. The second hose comes out the intercooler bottom right and goes up to the egr valve on the front right of the engine. If...
  11. P

    What did you do with your Range Rover today

    Pressure tested the AC last week with UV dye and the condenser looks like an 80s pop star that had been shot with a shotgun. Holes everywhere. New condenser fitted today, regass, evaporated temp down to 1°. Now we'll have 6 months of rain and cold.
  12. P

    2000 RPM max

    The waste gate pipework is still attached and any linkages properly setup as far as preloaded goes if it's external?
  13. P

    2000 RPM max

    That stuff was the bain of my life. Massive cause of concern on aircraft.
  14. P

    What did you do with your Range Rover today

    Have you tried sacrificing the kids to the gods? Win in both cases......
  15. P

    2000 RPM max

    If its largely been laid up, you have had a good look around that's rats or mice haven't chewed on the wiring etc or haven't made a nest in the air pipework or exhaust? Only asking as I have witnessed all of these over the years and we tend to overlook the simple answers. Also, how old is the...
Back
Top