pscan.eu's latest activity

Maybe try Green Light next time. However you *must* have five off-road mods in addition to EV mod, things like snorkel, suspension lift, winch etc etc and you might have to prove that you have them, however they are a lot cheaper than Adrian Flux.

Ah I suppose key 1 and key 2 are completely different inputs so you can connect them to two different resistor networks. I don't know why I didn't think of that.

There are only four functions on the steering wheel (vol+, vol-, back, next), and just using the key 1 wire they all work. I don't think that there's any more functionality to be gained.

Got our insurance sorted yesterday. Everyone says that Admiral multicar doesn't do modified car insurance, but, it seems that if you have insured all your cars and your home with them for seven or eight years, and it's renewal time, and I suppose...

Thank you for replying. What you said worked. Just to be clear:- The two wires that you cut come from the steering wheel controls to the back of the factory head unit plug. You earth one of the wires to chassis. You connect the other wire to the...

that's what my Jaguar XJ is for.

I had a Peugeot 607 2.2 HDI auto that was like that. It only had four gears and first was very high. Pulling out on busy roundabouts was a nightmare. I would have to stay back from the line and anticipate a gap, floor it, and run up to the...

by the way, I bought a double DIN cage and a Freelander 1 adapter, but this didn't work well. It resulted in the headunit sticking out of the dash by about 14mm too much. What did work was drawing around the adapter onto a piece of scrap washing...

Hi I bought a Joying Android head unit a couple of years ago. I can find no indications of what exact model it is in the menus, it just says Android 10. There are two unused wires coming out of the back labelled "key1" and "key2" and my guess is...

It's not perfect, but I quite like it. i think that maybe the gearbox assumes that the engine has more torque than it does, so it does take a fair bit of accelerator depression before it "kicks down", but I actually quite like that. I can...

I went for a bit of a drive with a friend this morning and got it warm. Went back to the garage and got it level (previously it was a bit nose up) and warm (previously I think it was cold) and I had to add a whole litre of ATF before it started...

The noise definitely varies with input revs, so it's something that's spinning at input speed. When I looked at this before I noticed that in D but stationary the noise is still there. The interesting thing about D and stationary is that in that...

I removed both belts (PAS and alternator). The noise stays the same.

can anyone tell me what they think this noise is? doesn't do it when the drivetrain is cold:-

I have spent a few days playing with different types of solder. I got some 56% silver, and it is incredibly strong:- but, I had to get it very, very hot to make it work. An ordinary propane torch wasn't hot enough and I had to go to MAP X gas...