Padda.116's latest activity

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
  • Padda.116
    Padda.116 reacted to backinblack's post in the thread L322 orginal parts please? with Like Like.
    I believe the late 2005 was a bit of a crossover to the 2006 facelift model so you may find that the lights are factory fit 2006 ones, no idea how you will find out other than the original build sheet. The lack of headlamp wipers would indicate...
  • Padda.116
    Padda.116 reacted to Mark Piercy's post in the thread L322 orginal parts please? with Like Like.
    The problem with the chrome or chrome plated plastic is that it starts to peel.. Given the choice I'm with you and a solid none peelable finish for practicality. 👍
  • Padda.116
    Padda.116 replied to the thread L322 orginal parts please?.
    Thanks, I’m not a fan of the chrome at all but everyone has their own taste! :))
  • Padda.116
    Hi all, I have just got a very late 2005 RR l322 vogue. It had chrome grill, side vents, handles etc and I’m trying to put back to orginal. They are for sale if anyone is interested or swaps. What are the orginal brake lights, headlights...
    • IMG_5741.png
    • IMG_5797.jpeg
    • IMG_5798.jpeg
  • Padda.116
    Hi All, My good friend has a 2005 RR l322 vouge. He used to daily drive it but he is old and would sit there with the heater on but not running and flatten the battery. Long story short it got left somewhere for about a week or so after...
  • Padda.116
    Hi all, I’m posting on behalf of a Freind. He had a 2003 Disco 2 Manual with a bigger turbo intercooler and remapped pushing 220hp. With extreme power LOF clutch. He accelerated as hard as he could and started wheel spinning like crazy and then...
    • IMG_5624.jpeg
    • IMG_5515.jpeg
  • Padda.116
    Hi all, I need to renew the brake pedal spring as it’s not pulling the pedal back into its resting position anymore. I have attached a picture of the clutch pedal and the brake pedal could someone please give me a link for both of them OEM...
    • IMG_5560.jpeg
    • IMG_5561.jpeg
    • IMG_5562.jpeg
    • IMG_5563.jpeg
  • Padda.116
    Padda.116 reacted to grewth's post in the thread Fuel sender unit with Haha Haha.
    You can't do that, it's FAR too sensible! How about the traditional method of just slapping everything together and driving until you run out of fuel. Make sure that you don't carry any spare fuel in the vehicle, then you can enjoy a nice...
  • Padda.116
    Padda.116 reacted to discool's post in the thread Fuel sender unit with Like Like.
    Maybe ask on forum is any one has used the Britpart kit and how they did there must try and see. Maybe as a suggestion, with an empty tank, and if it can be done, empty the tank and fit the sensor on its lowest setting in the tank, than slowly...
  • Padda.116
    Padda.116 replied to the thread Fuel sender unit.
    I was having a think about it last night and that is exactly what I’m going to do! Empty tank Put exactly 10L in (apparently same as 90 200tdi) which is close enough to series Put the sender unit in and see when it starts to float on top Tighten...
  • Padda.116
    Padda.116 reacted to backinblack's post in the thread RR L322 Air suspension been stood with Like Like.
    The air suspension ecu is in the passenger side footwell behind the panel on the left if remember correctly and not under the seat. Diagnostics should say if it's missing.
  • Padda.116
    lol, I think the other people that operate from there heard we was finally taking it and quickly whipped them bits off before we took it away!
  • Padda.116
    Padda.116 replied to the thread Fuel sender unit.
    I want it so I have a small amount in it when it’s getting low like my D1. However now when it read empty I’m going to say I’ve got just under 1/4 tank still left lol
  • Padda.116
    Padda.116 replied to the thread Fuel sender unit.
    No I know but it’s quite a lot left in the tank lol
  • Padda.116
    Hi all, I was just wondering what’s the adjustment on a LR series 3 fuel sender unit? my gauge works ok it’s just when set it I’ve left a bit to much in the tank when it reads empty. it’s the britpart sender unit with 2 rods that you set...
  • Padda.116
    I think you'll find there is a handbrake release in the boot, pull the right side trim out to expose the rear fusebox and look in towards the front of the car near the top of the wheel well. There's the emergency filler cap release with a...
  • Padda.116
    Hi all, Sorry to ask basically the same question about a million times however I think mine is slightly different. I have a 2006 RR L322 3.6 Diesel V8. It’s been stood at my yard for around 3 years and was absolutely perfect when parked up. I...
    • IMG_5409.jpeg
    • IMG_5407.jpeg
    • IMG_5410.jpeg
    • IMG_5408.jpeg
Back
Top