P38Seb's latest activity

Stops the water leaking in through the sun roof drains. Humans are waterproof, P38s are not 😂

Notice the P38s under cover - the kids sleep out in the rain 😂

Threw the tent on the roof and ventured out to the north of Dartmoor for the night.

If all else fails there is always the 240 air con (2 windows open 40mph )

Oh my.. my wallet is much happier looking at those prices!

Might be the thermostatic expansion valve. If that's faulty it can over pressurise and vent to atmosphere. I got one from some aircon place and it took about 10 minutes to fit. Got the garage to empty it, swapped the valve then got them to regas...

Doesn’t look too bad to get to, and not that expensive. As much as I’d like to nail it first try this is a 24yr old car so replacing everything won’t be such a bad thing.

Most often it's the top right corner of the condensor leaking.

Mines wabco D, the last type I believe. For @P38Seb Nano said my RR was faulty but twas front left.

This what what Marty posted on the Nanocom forum. As of July 2024 there was no update from BBS. ==================================== Had a look at a couple of P38's with ABS problems, which have both turned out to be the wheel speed sensor...

This was Halfrauds as it meant they’d come to me. From memory they didn’t put dye in - this was a few years ago now mind.

Bear in mind that the nano isn't correct on abs sensor positions. I've got the correct ones marked on the case I keep the nano in. I forget which is which and I'm not home at the mo but I'll post them up when I'm back later if you like.

Yeah I’ve seen this mentioned before. If you can let me know that would be grand - if not I’ll trial and error disconnecting them and see what effect it has on the readings.

Lack of gas due to leaks is the usual problem.

Oh it’s 100% that. I’ve had it regassed and pressure tested and no leaks.. yet it’s not working 2 weeks later. Regassed myself from empty and after 2 weeks no cold air. I need to get some dye in there somehow and try and figure it out - I’m...

Finally got around to ordering a Nanocom. ABS and TC lights have returned, so 2 front sensors have already been replaced - be interesting to see if they’re the culprits again. See what happens and maybe order a full set. Also need to try and...

Post by Montyjohn

You’ll likely drop a few MPG - yes they’ve got a larger diameter so distance covered per rotation will be greater.. but they’ll weigh more. More mass, more energy required to rotate.

https://tiresize.com/comparison/ This can be quite a good site to see size differences and speed changes. Most speedos over read your actual speed, so indicated 60mph could be actually be 57mph for instance. Provided you don’t go too far bigger...

Braking cancels mine until I press resume. Accelerator work then it automatically resumes the set speed when you lift off.

Do you think it will work in a boys bedroom, asking for a friend ? :oops:

£125 for the pipe 😳 definitely makes the saving of the earlier condenser less palatable. That’s for the advice though

Early one can be used, means a minor chopping off of some lower brackets AND a new compressor to condensor pipe. Island sell them, not cheap though.

The P38 has been retired from daily duties to now being a weekend only car. It’s thanked me by throwing a constant ABS/TC fault, so need to get the Nanocom on that.. But today has certainly highlighted the need for me to fix the air con. There’s...