Mark Piercy's latest activity

When you have refilled it in the past what method have you used? Refill engine off? Refill, then top up with engine running🤔👍

I'm very sorry to say it, but if you have metal powder in the oil, it's time for a rebuild or a second hand replacement.

Hi, first of all I want to thank you everyone on this forum who always comments and gives advice, they have truly been a lifesaver in many instances, from when my engine was overheating or died altogether, air suspension failing to car getting...

Hot start fix should bring the glow plugs on every time.

Could be loss of sync from RF interference?

I have one like that, my fix will hopefully be fitting the one from my scrapper if it's any good.

Wonder if there is a fix for the drop down springy flap thing that doesn't springy down anymore? I have to manually lower it which isn't on really.

I think it needed 15mm strip. Wickes only had 20x2mm & complete faff in the hot weather narrowing them all down !!

PM me with an Email address.

Would you mind DMing me the process please?

With my steel rule method, it's almost as quick to do the timing as it is to fit the hot start box.

Realise this. I fitted it back when the car was daily driven, and needed a ‘quick fix’ - now it’s an occasional weekend car there’s a whole list of jobs to put it back to proper.

Got to do mine at some point.

The hot start fix is a bodge with the modulation correct, my car starts immediately hot or cold.

The glove box can be a right pain in the arris to get open and working properly :(

All done. Bought some M5 x 25mm bolts from Wickes this morning and it went in first time. Bracket lines up properly and all. Shame it was a 50 pack - anybody need 49 spare bolts? 😆 Pressure tested to 15 psi for about 10 mins, and no leaks...

I want a lady garage as well😝

When i did both rears a few years ago, there were surprisingly easy and no swear words required

I hope they know what they are doing or you could have a problem.

Cheers thanks mate 👍

I will probably get my local landy garage to chuck the new bags in as i need the car for a trip in the coming weeks. Thank you anyway.

Here`s the late Wammers guide to fault finding the eas https://www.landyzone.co.uk/land-rover/checking-eas-compressor-and-diaphragm-valve.172555/

There is a guide to replacing the airbags in the technical archive, if you can't find it I can send it to you.

Ordering them now

I have no concern for how I seem here. I asked a simple question and I was insulted and attacked from the start. Those people will never change their opinion of me, especially after I called them out on their ridiculous behavior. I will not...

I think you are imagining an extreme situation and not looking at this in reality. For example, someone else said that the oil pressure would be lower and that would damage the engine. But I can drive now at 40mph at the same approximate revs...

Id love to hear how this plan works out too

Well I, for one, would like to hear how this experiment goes.

For the benefit of all future readers it might be good if you shared the detail of that. It might make you come out of this thread less negatively