I counted about 15 knocks in 5 seconds that’s 180 per minute
Assume tickover speed about 720rpm, so cam speed is 360rpm
Does it sound noiser with ear to air intake
After rebuilding my 200di I had a regular clonk like that , turned out I stuffed a...
Hi mate
Funny anough I had to look up what a joggler was , lol
https://www.machinemart.co.uk/p/edge-setterjoggler-with-hole-punch/
Indeed bet that’s fun trying to do it manually particularly if the metal is quite thick
Hope ur good mate
I got most of my info from Glen Anderson who had posted on terri ann land rover page, which is a goldmine of info.
Here is link to Glens conversion, Iirc his is a 109 which is why he used the defender manifolds...
Have you drilled the flywheel housing for the bottom 2 or 4 bolts?
Exhaust I made my own, but think Steve parker used to do a kit.
Rad I used the original s2 one, mine is the early narrow type and keeps it cool just fine.
I did fit the...
You could put a tap in one of the coolant lines, most are 15mm id, which is what most UK houses run for hot and cold water circuits, so shoudl be a cheap/easy job.
But I would check the cooling diagram schematics first in case the heater circuit...
I would do what is easiest/quickest, less cut out the better for the car.
How are you joggling the steel sheet? I ask as I bought a joggler (cheap one) and it is bloody rubbish.