Recent content by Laserman
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
-
L
Just discovered a solution . Star lock washers !
All sorted tomorrow
-
L
Evening all
I am trying to find a way of preventing the latch actuator separating from the lock hook. Is it a part that is available or do I need to buy a new latch actuator?
-
L
👍🏻👍🏻will give it a go Thanks
-
L
Good morning all. I have just inherited another free lander but this is the td4 convertible style (ironic given the weather at the moment). Any way my question is why have I got no power at the obd point. I have taken a pic of the wires coming in and wonder if someone knows what does what. Only...
-
-
L
Got the window to wind up by removing the casing on the motor and exposing the windings. Put a cordless drill on the centre shaft and having worked out which way to wind it I used the drill to spin the shaft and up went the window. 👍🏻👍
-
L
All sorted. No idea what the problem is/was but having spent nearly all day dismantling,testing ,thread reading etc I decided just to put it all back together. Everything now works. It’s some kind of Freelander witchcraft 😂😂
-
L
All done. Don’t know what the issue was but put everything back together having spent hours dismantling everything and hey presto everything works as it should. Must be some kind of witchcraft😂😂
-
L
I have already managed to get the door card off.The proclem is that the window has powered into the open position and i cant get it to go up.Is there a way of powering up the window mechanism using a seperate battery onto the rear of the motor.If so what terminals do I need to feed.
-
L
Following on from my previous post I have now managed to get the tailgate window down but have trapped wires underneath the window.Does anyone know how to power up the window motor to get it to raise.Only need it to go couple of inches.Found a pair of relays in the rear booth area (brown in...
-
L
Ok thanks for the info. Didn’t think about window and door connection. Will get window issue sorted first and see where that takes me. Thanks again
-
L
Hi all.I have a 98 FL1 and she has decided to stop sending powerr to the rear tailgate actuator as well as continuously blowing the fuse to the tailgate window(i can live without that working).I have managed to open the tailgate by supplying the actuator with a seperate power source directly...
-
L
I had the same issue.If you get in the boot and use a tool to lift the corner of the door card clear of the lip you can remove the whole thing by sliding your finger under the top of the card.To open the door i used another battery and used it to feed power to the actuator terminals (purple and...
-
-
L
Can take photo if that helps