Recent content by Landycj
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
-
L
Sorry for posting here wont let me post in for sale
-
-
L
Bad for corrosiab in the connector
-
-
L
Washes polished and full valet
-
L
Warths, i meant earths ****ey touchscreen
-
L
10.5 v at the injectors and to 2 of the warths to the pcm but when ai disconect the multiplih after abouy 3 minutes my readi ga change to good readings 12.5 then i plug it back inand its 10.5 v. Its a 2003 1.8 freelander. Checked some of my eartgs but will can i fond all my earths? The ones for...
-
L
Iv posted it on another page im getting a bad ground to the injectors and to the ecu only getting 10.5v against battery positive which is 12.5
-
-
L
Hey guys can anyone tell me where all the earth points are goin to the ecu. I have a starting problem where i am only getting 10.5v to the injectors and pcm due to the earth.
Any help would be great thanks
Landycj
-
L
Theres no codes only getin 10.5 v at pcm too
-
L
I checked my voltage only getting 10.5v battery is at 12.5. Checked the positive side against a good earth and i get 12.5 checked the earth side against battery positive and i only get 10.5, possibly bad earth somewhere??? Also they are not switch with a noid light.
Any ideas?
-
L
Hey thanks for your reply i checked for spark all good checked pump could hear the pump and disconnected from pip to ensure it was pumping was all good. What checks can i all do on injectors? Also is there anyway to check the fuel pressure regulator, i gave it avacume of 18 psi and it wouldnt...
-
L
Thanks iv introduced myself now. Thanks how would i go about checking that should i just be looking for 12 volts onto injector? Do you know what wire?
-
L
Hey guys im new to this forum i have a freelander with the drwaded 1.8 k series engine. 2003 76000 miles would be great if anyone could help me out on a starting problem iv posted about
Thanks