I had a session on the handbrake this morning. It's been getting less effective lately and as I suspected, oil has been getting inside from the transfer box. I'd got a new kit of shoes and springs so I put those on, and a new cable. I got a new...
Changed the radius arm bushes on the drivers side to match the passenger side I did the other week.
Had to cut one of the bolts off as there was not chance it was coming out.
Went back together no problem which is good.
Britpart yellow polybushes...
They have a long power cable length normally ,my relays are on the upright by the radiator for easy acsess. Main power lead is fed off the starter solinoid,saved me going back to the battery.
Switching is done off the old headlight circuit on to...
Hi and welcome!
Yes, they all do that… and they leak, are draughty and use more fuel than boring cars. But you smile whenever you drive one and other Landy drivers wave at you. You don’t get that in a VW, BMW or Ford etc…
Righttt
New O ring on the Fourby cam cap + a healthy amount of RTV.
Also resealed the alternator oil feed incase it was that.
Also found the header tank almost empty 🫥
Need to remember to check that... only downside of a watercooled turbo....
Good idea getting those LED jobbies off. Silly things that really don't do much, other than blind other road users and get coated in snow in the winter.
I like the look of Quadoptics but the Crystal lamps are as better at lighting the road...
Used up some old yoga matts, bit of carpet glue and some paint for some much needed sound proofing 👌🏻 works a treat still going to be noisy with M/T tyres but at least I can chat with passages now lol
Today I’m trying to work out the puzzle which is the lighting wiring on the 90.
There were some very poor connections behind which have been removed, but as 24 hours has passed since I took them off (due to torrential rain) I need to redraw the...
All sorted. Replaced the a frame bushes, bolts, and the rear fulcrum. I have come to learn that heat, angle grinders, and more force than you think are required.
All good fun!
Started late today, so it was head down, ass up kind of day. I had used the same setting method on the input and mainshafts. I re-adjusted the High low detent and am much happier with how it shifts. I fitted the Difflock cover and then removed...
Well when it rains it pours...
Had a VERY concerning moment earlier! Started the 110, left it running for a min came back to quite a lot of smoke coming out the bonnet!
Turned off, checked, no fire... it appears the cam cap is leaking into the...
As above, a problem selecting gears is a clutch, main box issue.
Transfer box, put the diff lock in and see how much movement you have at the flanges [both props need to be off to do this properly] If there is a lot of slop when one flange is...
Up bright and early, Dog walked and the boxes arrived right after lunch Dandy
Got it all unpacked and checked over and got started.
Gave the casings a whiff of silver to try to slow the oxidisation process
While that was drying I started to...
Everythings been pretty good for a while!
Except when I fitted new wiper blades, turned them on and got stuck...
Now the wipers are rather weak, so that only means one thing...
Wiper overhaul 😥 one job i rather dread....
In the mean time...
The Sleeved casing and a big box of goodies is due to arrive from Ashcroft's tomorrow.
I have removed all the bearings from their various locations and cleaned up all the bits.
I called in a favour and got the casings blasted, as I'm going to...
As mentioned, a poor repair which was likely covered in underseal. The rust will also be worse than what you can see as the chassis will be rusting from the inside. There might be space to negotiate on price given the cost of repair but unless...
Izzy got some fresh air over the weekend. The roof was lifted off in the garage and now hangs from the ceiling. Which is great as its out of the way...but is a bit of a blocker for a couple of the flourescent strip tubes...
The side panels are...
Hi and welcome!
To begin with, I wondered why a picture of some scaffolding had been posted until I scrolled down further! Nice looking disco. That’s quite a list of preventative maintenance done there too.
Thankyou Stanley, much appreciated, I did pay more than I wanted to but this car was just too good to walk away from, I paid well south of £10,000 from a dealer but via a mate who is in the trade so effectively a trade deal .
Hey all! Can’t believe after five years we’ve managed to join the dots on this!
Absolutely fantastic to see it! Thanks so much for posting. It means a huge amount…
Delighted it’s with a good home. I’d been trying to keep a track through the...