Replacement engine with working IRD now in car. Just have to connect it all up and rebuild the front subframe and wishbones, driveshafts etc. If I did it again I would remove the bolts holding the manual gear lever link arms on the bulkhead...
Can't have looked at many Landies if you've never seen an advisory for an oil leak!
I got this advisory on mine a couple of years back...
They're still there!
The aircon has failed on my 2005 TD4 and the culprit appears to be at least one of the o-rings where the hoses join onto the valve at the bulkhead (there is quite a residue around the union which points to an escape). Now I have an offer of a...
It's just this is your 4th post with the same problem. Makes it really difficult to see what responses you have had and what has been advised and tried.
Remove duplicate posts, post results of tests and you'll find this is one of the best...
Just revisiting this idea.
To accommodate the comments made, proposing Saturday 13th September.
Again, if there are enough 👍then I will do some planning.
Back onto this one again now.
Donor car is on the ramp, warmed up and drained all fluids. Removed all failed glowplugs. One left a tip in the engine. Will add how I got that out in the glowplug thread.
All disconnections made on top and all...
Good report 10/10 for the TD4 Sport Auto.
Never missed a beat. 1650 miles. Overall average 34.6 mpg. That included a week on Mull in 3rd and 4th gear. Motorway runs averaged 36.5 mpg at a steady 70mph over 450 miles.
Took a bag of spares, lp...
The Zombieverter is a board that was mainly designed to control OEM hardware like inverters/motors, heaters, chargers etc by sending the appropriate CAN signals and it's constantly being updated with new hardware being added to the menu's.
It can...
It could be confusing for a first time reader of this thread.
I must admit that I'm interested in this zombi VCU, as I'm wondering if it could made to work with other vehicles, like the Freelander 2, maybe?
I think prices of batteries and dead...