Jeddabean's latest activity

Red rubber grease

Great, thanks 👍🏻

What is the best grease to buy for the guide pins on the calipers??

I've botched it for now but the car has lost a lot of power. Hopefully I can find one online

Don't suppose you know what this is? The pipe was looking tatty and I've snapped the plastic nipple trying to replace the pipe. It connects to the manifold

Ignore that message sorry you have answered it already

Do you know if the gasket on a 2.5 bmw is a full gasket or 6 separate ones? Thanks

I need to source an m8 nut because the manifold has been taken off before previously and noticed a nut missing the inside one at the end nearest to the windscreen. Either a bugger to bolt in or lost it taking the manifold at the time.

Think I will actually didn't realise I removed that many nuts off the manifold 👍🏻

Luckily the one nearest the windscreen looks good, I've replaced the others thou. Managed to pick up the kit which come with the bung if it did need doing.

Struggling to replace the long one pipe, having to take off the inlet manifold for better access. I hope these old range rovers are worth the bother. 🤣

Spot on thanks for your help 👍🏻👍🏻

So to remove the old pipes I just simply pull them off and make sure it's all been removed?? And the new ones are a push fit? Thanks 👍🏻

Thanks for your help 👍🏻 appreciate it

Is it an expensive job to replace them? Thanks for the help 👍🏻

Hi all, can you help me please. I have started the engine this morning on my p38 and noticed a leak under the car. Opened the bonnet and there was a clear liquid coming out of a small pipe. Pipe has snapped. Any ideas on how this can be fixed and...

So it has been put on in the wrong order. Thanks for your help. Hopefully I can find someone who knows what there doing to rectify this. 👌🏻👍🏻👍🏻

It doesn't have air con, very basic model, it's the alternator belt, drive belt. The new belt is on but only the top bolt of the tensioner. We can't figure out how to make the bottom bolt holes line up. Thanks

Hi, I have a 1996 p38 2.5 bmw, the belt snapped on it a few days ago, had a mobile mechanic out to look at it and he said the the tentioner had failed, that was the reason the belt shreaded. I ordered a new belt and tentioner from gsf parts and...