GrumpyGel's latest activity

Although I may have had to remove the bits between the seat to allow the dash console to flex (I might not have), I managed to ease the bottom of the console panel away from the carpet in the passenger footwell to pull the wires off the cig...

I'd leave the cigarette lighter where it is, pull the wires off the back of it and join them up to your USB socket. If you are lucky the wires will be long enough to reach where you want then to go without needing to be extended and may be the...

They are self-under sealing… clever motors

Can't have looked at many Landies if you've never seen an advisory for an oil leak! I got this advisory on mine a couple of years back... They're still there!

It's just this is your 4th post with the same problem. Makes it really difficult to see what responses you have had and what has been advised and tried. Remove duplicate posts, post results of tests and you'll find this is one of the best...

Replaced the rear n/s door window regulator in my old F1 (now cherished by my daughter). Easy job - old out and new in, all bolted back up again. Of course, being the smart man that I am, I thought to check it all worked properly before putting...

just come back from sunny norfolk and the car went so well ans so quiet,,,,,bliss.

You can tell by the wear on the door side part of the seat bases (the side support bit) on most F1s that they are a bit high for slide in/out access. F2s appear about the same height. There are lots of people who want to make their Freelanders...

They maybe equally useful, but if you put your back out or harm your disabled passenger getting in or out, it's an expensive bauble. Sadly I learnt late when my own departed mother was disabled how much strain of both parties. My own vanity...

Yeh, but both have a 750kg unbraked towing capacity.