Recent content by Galladog

I'm sure they go every year.

Engine 710 are in S Queensferry but I'm not sure if they break LR's, worth a phone call seeing as it's so close to you.

As far as I am aware the axles, engine, gearbox, transfer box and steering box.

Gem have a good reputation, the owner is well known in in the SLROC.

Check or replace the oil in the engine, gearbox, transfer box and both diffs. Change fuel filter and air filter.

The Defender Parts Catalogue doesn't list a screw to hold the lock barrel in place, it's a small pin that you have to depress to remove the barrel. If yours had a screw fitted I can only presume that it was fitted by a previous owner.

Sorry but that photo was pinched from a Stalking forum. There was one fitted to an Estate Land Rover that I used about twenty years ago. From memory the hinges and locking system were as follows. A section of angle iron with two plates about 4" x 4" welded to the angle iron that the uprights for...

I've killed Bambi, his mum, dad, brother, sister and thousands of his relatives 😂

This what your looking for ?

If the rest of the exhaust is ok just replace the rotten section. Have a look at Paddocks or similar parts supplier for it. It's easy to replace the section, just a couple of bolts ( which will have rusted solid so cut them off ), buy new bolts, the parts supplier will have them...

If it's a coil sprung chassis it's not a 1976 88 inch Land Rover so your V5 is invalid.

And NFU wanted an Engineers Report to make sure the snorkel was fitted correctly !!!

I was with LV for years, when I informed them of a chassis change they cancelled the policy even though it's a Marsland chassis. Lots of insurer's wouldn't cover me. In the end I went with Adrian Flux.

He was looking for £ 10750, and apparently it's been sold.

Cold air is dense, it's like having two intercoolers.