freelance's latest activity

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
  • freelance
    If the dealer is worth their salt, they won’t release the car back to you “ticking”, it’s a 100+k luxury car ffs
  • freelance
    freelance reacted to DanClarke's post in the thread Getting Gwen the Mini to Run. with Like Like.
    A BDL needle has been ordered (<£20 inc. P&P) so not a huge outlay. AND I have finally heard from the British Mini Club regarding their evaluation of the car. They have valued it as being worth £12,000. So that is 926 times my outlay for the...
  • freelance
    freelance reacted to Loafer61's post in the thread Kenya with Like Like.
    I had to add a Kenyan thread…
  • freelance
    Don’t start it until you have a belt. At the moment no water will be flowing round the engine. You can check everything else And put the battery on charge to make sure it starts
  • freelance
    It was running when you got home so hopefully not seized. Put a belt on it,check fluids(dip stick showing no water only oil) header tank(showing water no oil) Check water level in radiator(check make sure no oil again) Top up what’s needed(leave...
  • freelance
    freelance reacted to DanClarke's post in the thread Getting Gwen the Mini to Run. with Like Like.
    I only have a small and insignificant update (something my wife often complains about). ;) Throttle & Choke cables were attached (in the rain). :( Car starts OK, no identifiable petrol leaks or overflows, so the basics must be OK. :) I did get...
  • freelance
    freelance replied to the thread Getting Gwen the Mini to Run..
    Have you got a straight edge you can test the flatness of that flange with, and the flange on the manifold? Nuts need to be tight, but not monkey tight, or the aluminium can distort. ( but you know that)
Back
Top