Francesco M.'s latest activity

I don't see the risk as you have a Nanocom to turn the functions back on.

Thanks, I'll try to be sure before I do that. It would take some brave man to try 🤣

You are correct that on pre V36 EKA cannot be entered via Nanocom. However as far as I know, if the Immobiliser function is set to off, EKA should never be needed because as I said, mobilisation becomes an automatic function. In the unlikely...

Let me explain better, on Becms older than V36 (I have a V27) you cannot insert the EKA from Nanocom. From what I understand, it may ask to enter EKA code even if this is deactivated. Could I find myself in a situation where I can't insert Eka...

If the key blade fits the locks and the ignition, as long as the door lock micro switches are OK, you can use the car with just the key bade, no FOB needed. EKA is used to trigger mobilisation in the absence of a code from the FOB, with the...

I see you know the topic well and I have a question. I have a 1995 2.5 diesel with BeCM PAM V27, currently have no blocks. I would like to disable EKA and Immobilizer via Nanocom, is there a risk on these old versions that an EKA block will take...

Now use Nanocom to turn off the EKA function and the immobiliser, it will save you a lot of hassle at some point as you will be able to operate the car with just the key blade if necessary such as when RF interference blocks the FOB signal.

Hi Roberto ! I live in the middle Italy, Umbria, Perugia near Trasimeno lake😁 your engine was dead and you didn't know it 🤣. upload some photos we are curious 😁

Google translate can be your friend sometimes. :) I'm currently rebuilding a 1952 AEC 9.6 litre bus engine. No oil reaching the top end, valve stems and guides has 3mm of play!! It's great fun and I'm amazed the engine ran at all, but it did and...

@Francesco M. Welcome to the self-harming club. Interesting color your P38, in Italy they are almost all gray or blue. Seems to be a DT, so rather basic setup (but with Hevac) without headlight wipers, sunroof and with fabric interior. I have...

you're right, sorry, I corrected it. it's time to go to sleep🤣🤣🤣

"valve processing with abrasive paste. On the right, unmachined seats and valves, on the left, seats and valves ground with coarse and fine abrasive paste. Good night" Looks to me like the right side have been done, not the left ?? Mi sembra...

valve processing with abrasive paste. On the left, unmachined seats and valves, on the right, seats and valves ground with coarse and fine abrasive paste. Good night

Get the EKA and immobiliser turned off in the BECM and you can operate the car with just the key blade, the FOB will still work but is not necessary.

Operated for short periods and stopped for many years :(. I removed the central crankshaft bolt to extract the chain sprocket, which I will replace. For the closing I stick to RAVE (100nm + 60°+60°+30° ☠️). As you say, the oil pump is driven by a...

That screws the bearings, it does not gum up the rings. That happens when the car has been left standing, ask me how I know :rolleyes:

À great mission well accepted young man👌😎 Keep us upto date and plenty of pics please 🤩

Hi, I recently brought home a 1995 P38 2.5 diesel, taken from an old gentleman in my town for little money. The car had engine problems, arrived home by truck. A picture of the negotiation, concluded at €1000 (approximately £830). I immediately...

You got the bug. No going back now. Welcome You can make a ‘new thread’ in here for specific help - https://www.landyzone.co.uk/forum/range-rover.10/