Recent content by Descapri

To be fair god only knows how they lasted as long as they did plus I needed 3 hands at times instead of two 😂 now to fit the new pipes, should be fun..

Thank you much appreciated...

Could someone confirm the correct part numbers for the pulleys in this pic please..Td5 no ac and no ace.

Didn't get chance to add an earth strap but will do possibly at the weekend.

I've checked the voltage with the pump running as suggested first test 11.6v and again at 12.2 volts.

It does not randomly cut out, funnily enough the other day it was on level ground with a ctek trickle charger in place stating battery was full. Disconnected the charger and it started immediately. I will check the voltage tomorrow on the initial pump run as you suggest.

Thanks for this; I've replaced the fuel filter housing and filter.. Replaced the fuel pump (vdo unit). No leaks from the FPR. I've replaced the harness and cleaned the red plug. Checked twice since and it is oil free but will check again. I've not checked the nylon pipe which I will do now as I...

Currently it's one thing after another, now the turbos sprung a leak.. presume it's a rebuild or replacement required? Funnily enough it's currently driving really well 🙄

Just found out mine doesn't have the pump 5 times system being the early td5 🙄 obviously the problem is elsewhere so more reading required.. thanks anyway guys.

Pre facelift, 10p, manual TD5. I've followed the process but the mil light doesn't flash and the fuel pump doesn't kick in. Has anyone had this issue or what's the fix please. I'm chasing a poor morning start issue, new vdo pump and fuel filter housing recently installed. Once running it starts...

Thank you 👍

That's great thank you 👍

I've enclosed a couple of pics of the pipe which at some point has been replaced and made up using brake pipe etc. I have a leak at the slave cylinder end which is causing the obvious issues so have ordered a slave cylinder as the master is new I won't be replacing that. Could someone kindly...

Yes a small amount to sort out.

Read through a few posts followed the advice etc then finally the fuel pump started to run very loudly and finally stopped running yesterday. I've ordered a replacement but thought I'd start stripping the cover plate and clean up the area ready to fit it.. I think someone used a sound deadening...