dag019's latest activity

@dag019 Just having visions of a dog in a cage on the roof rack… Ours go to sleep when out in classic runs

That is a neat sounding idea, but unless you have a horse of a dog I would have thought the solution does not need to be hugely over engineered if all the board is doing is taking the weight of the dog and their bed. What sort of seats do you...

I’d be looking for a faulty lift pump (even from new) or an obstruction in the fuel line somewhere (possibly even within the lift pump).

I'm a little more considerate and use the spare tyre on the rear door as it is a little softer than the hitch :p

Yellow and red is for the fog light. There will be one on each side (same as the brown and green for reverse) but only one side will be used for each if you are still original. The loom is the same for RHD and LHD, so depending on which side of...

You would plug your vehicle live feed into something from TEMU ?

The lift pump on my disco 200tdi failed yesterday, but it failed in a way I have not seen before, see the video below. Usually when they fail the internal diaphragm fails and it stops pumping, not the casing failing and it just pumping fuel out...

I use a latching solenoid (LINK) on mine with a switch on the dash rather than a remote. It is hidden in plain sight with all the other identical toggle switches. I also have a fused bypass link which keeps the radio programmed etc, but as soon...

@dag019 Tagged him for you @Phippu

No. Unfortuantly not, I did not find any new or second hand and am currently running with bare doors. I am not sure if I will bother with the diy route or not. I have other pressures on my time and they are fairly low down the Land Rover work...

I would not expect resealing to be part of a respray, and also not part of a re-chassis. it is a separate job that would have needed to be specified. I filled my gutters with white tiger seal to reduce the leaks. It is up to you if you dig out...

Just to throw another spanner in the works why have you chosen DT connectors rather than AMP econoseal connectors which do the same things, are a modern multi pin waterproof connector, and more importantly are what land rover used themselves in...

I have not looked, but my first port of call would be YRM. I have not found a body/chassis bracket yet that I have needed that they do not stock. It is also something that if they do not currently stock they may look to manufacture for you and...

Any high temp RTV sealant will do the job. I have used two different brands that were just the ones available on ebay at the time of needing it. Last one was designed to wood burning stove chimneys according to the advert!

It should be a fairly large brown wire with a ring terminal (originally attached to the starter) which would come out of the centre of the bulkhead and then go to the passenger side of the engine. I am not sure which side the starter is on for...