brianp38dse's latest activity

He hasn't noticed that he has actually got a diesel.

Yes i have the proper tool, makes it a lot easier, its quite a weighty lump.

Glad its sorted, they are very nice when they are working right. :)

You know you want it :vb-biggrin:

found a blue one near an abandoned house under some brambles. Wondering who owns the land as it looks a sorta nice one? Try get a pic if I’m in that area next week

There are three pumps on the l322 intank transfer one, mid one under the car and the high pressure one on the engine.

There is a transfer pump in the tank to pump from one side to the other if that has gone it can look like you have fuel but the side the pickup is in has not, open the fuel cap and have a listen for the pump running.

Dont bother trying to press the old bushes out run a drill bit through the bush a couple of times just catching the inside of plastic outer and you should be able to collapse the outer and hook them out with a screw driver.

Yeah you need 4 individual bushes. Temporary solution that will probably save you a bunch of time: -Use the two bushes you have now to replace the ones you've marked in blue. One on each radius arm. -Refit the radius arms with the old bushes in...

We are at the final steps, leaving the courtyard of the house the Range arrives at a true professional who will bring it back to its glorious splendor ❤️

That modulation is way out it should be 50%

When I did mine I put the chassis on stands and had the wheels on the ground so axle was supported and did one arm at a time that way nothing moved

Easier than sorting your mpg calculations out 🙌 Il get me coat

Sounds like the alternator is gone which was causing the squealing

Battery not being able to hold a charge or earth lead to engine corroded. what is the voltage on the battery engine off , has it been load tested a good battery should be 12.8 volts having been left over night less than 12,5 and its considered dead

It is but holy fooook: https://saabcarparts.nl/en/sensors/5612-pressure-sensor-abs-saab-900-9000.html

I think it was a Saab that had the same switch.

Hi, as some of you said, I couldn't find the hard plastic seals for the secondary pistons, I found a good used modulator from 1998 and took it. The part looks good and there is no dirt inside, I think I got a good deal. I removed the washers and...