Can't find the list :(

Hi every one...... In need of some help.!! I've repaired my blend motors and need to recalibrate them. I can't find any one with a diagnostic local ish that is mobile, I have my dash out and the front seats out ready (just incase the blend motors won't recalibrate for any reason)...

It's identical to a noisy tappet, I put a stethoscope on it to day, no. 3 injector (non wire) sounds like we're the tapping is coming from sounds very hollow compared to the others. Ill replace in the morning and see if this fixes it. Watch this space.....

Hi wammers, yeah I looked at that guide, I haven't got a diagnostic to re calibrate it:( Is there another way?

How did you get on with this? I've done the same thing fitted new pots but the hole and throw is off compared to the old pots,so if I was to line both arrows up if would be end the end of the pot swing.?

Hi all, I brought a range rover p38 2.5 dse with a suspect dodgy hydrlic lifter, drove it 3hrs home and still no change, so changed.Oil and filter with no change. so got another set of tappets,pulled head off and re-lapped in the valves, refitted and still no change...... Noticed a leak from...

Was just a thought seems a waste of engine just sitting in the trailer :( Ill find another bmw to chuck it in ;) it does go very well !

Quick question: I have a m57 engine from a 2003 BMW 330d with wire loom and ecu ...... Will the m57 engine bolt up to the p38 range rover? Also how much power and torque and the running gear hold? The m57 is tuned and pushing 520lbs ft of torque & 280bhp ;) Would it be a major bit...

Ill have a look :) Cheers

Hi every one.... I brought a 1995 2.5dse and noticed there a few problems....... The passagenr front door had no power, if you have this problem: Check your fuses under driver seat 1st if there all ok then... Remove the kick panel on passanger foot well and remove the door card, grab...

hi andy are you local to biggleswade? 07713124400 might need ya help if you have diagnostic toys. ive got a snap on solus pro if you need any think doing.

Going to download rave today and have a study. I see a fues missing in f11 so put one in it, just see on autodata it's for towing lol There's a plug on driverside engine bay that is unplugged? If I plug it bk in the gearbox selects high range and the button won't disengage it untill I unplug it?

Lol thanks for all the advice and help so far, I normally use autodata but our pc has died, so had a little search here 1st and see a post saying you could remove the camshaft without pulling most of the engine about using a coat hanger to release the tension on the chain, but couldent see any...

Hi all, I brought a nice little project from Wales , I got a nice tappet noise and I drove for 4hrs and its still there! I replaced the oil and filter and yes it's still there. I brought a set of tappets today, un bolted rocket cover, but when I went to set it to tdc I can't see any timing...

Hydrolic lifters

My bad think I'm in the wrong section: It's a range rover 2.5 dse

Hi all, I brought a nice little project from Wales , I got a nice tappet noise and I drove for 4hrs and its still there! I replaced the oil and filter and yes it's still there. I brought a set of tappets today, un bolted rocket cover, but when I went to set it to tdc I can't see any timing...

Hi all been viewing post & topics for a few weeks and thought I would register and say hi. I just brought a p38 diesel with loads of problems as some think to play with over Xmas period ;) If any one is local to Biggleswade, Bedfordshire & herts? Ill be after parts as every were is closed...

Biggleswade,bedfordshire