Nuts loose on the master cylinder push rod maybe

If it's that hard to remove its likely that it's not just weight on it, it maybe that the bulkhead is leaning forward or backwards, try slackening everything that holds it upright and removing unnecessary load, doors etc. Failing that, drill a hole in the centre, pop an ezi-out in and get...

If you PM me your number I'll talk you through it, it works a treat. Somebody showed me after I struggled for hours!

http://www.landyzone.co.uk/lz/f7/windscreen-rubber-seal-231998.html

I had it before where I pulled the top off the box to look at the selector mechanism and where I had out it in hear had jammed it on the rod so all looked good. Problem was staring me in the face tho, tightened the grub screw on the selector shaft and job done

I would say a transmission whine, you're just not hearing it over the engine when it revs! Try disconnecting props and checking for play/grinding in diff's and boxes

I changed my'n not to long ago for a heated windscreen, was a pain in the arse until my dad came over and made me look like an idiot. We warmed the seal in some hot water and placed the seal around the window whilst it was led flat. Then cut two lengths of string, put the string in the frame...

Don't run too much oil in the cold weather though, she'll struggle to start a bit

20L drums at Costco are £18, it's got a modifying agent in but so has all veg oil, my 200tdi runs lovely on it, if a bit smelly,

Just a quick thought, check the light stalk for continuity. I don't really understand why it did what it did but I had a similar problem with certain lights switching on and not others, turned out that when I went from side to dipped the switch wasn't making properly.

I made one up pretty simply, some 3mm plates and tacked them around the sides, drilled the holes and used threaded bar, it takes a bit of moving but off she popped

Sounds like the springs cant return the shoes, if you get under and give the linkage a tap it'll return ok (hopefully whilst not on a hill otherwise you might get run over) take it all apart and clean the pistons up and the bores, crap in there will prevent them from sliding nice, assemble with...

I've tested the ignition switch and seems ok, I'm sure all the earth's are on, my auto elec skills aren't the best but have been trying to trace the wires from the lights to the switch so see if I have plugged something in wrong somewhere, I keep getting lost in the main dashboard loom! thanks

Hi I have just completed a bulkhead change on my defender 200tdi. Also done a few other things, timing belt, heated windscreen, dam good service and clean and to my surprise when I turned the key everything works . . . except the lights, nothing except the sidelights, not indicators, hazards...

Had another look today, the rose fitting on the selector shaft had actually come lose, when I checked it last time I must have forced it around when trying to select a gear. Feel a bit stupid for not spotting it the first time :mad: Tightened the grub screw into place and I'm away. Thanks again

Thanks for the advice, I'll have a look tomorrow and post how I get on.

Hi all, I noticed a while ago that to select reverse I know longer had to push it through the gate. Nothing else was wrong and it wasn't getting any worse so I decided to ignore it. However, Monday morning I jumped in and reverse has moved to the middle of the box and 2nd, 4th and 5th are...

Hi all, Just joined up here, I have a defender 110 and live in Aberdeen. I've had the defender a few months, my first landy, and have been firefighting a few small problems. Now i have a BIG problem with the gearbox, i'll be posting soon, any help would be much appreciated. Thanks everyone!