Hi all i have fore sale a defender 90 300tdi on a 1997 R reg unfinished rebuild. i was planning to finish this chassis swop and complete body rebuild i just dont have the time to finish. hear is as far as i have got with it. i have painted the new galvanized chassis. painted the bulk head...

Hi all i have fore sale a defender 90 300tdi on a 1997 R reg unfinished rebuild. i was planning to finish this chassis swop and complete body rebuild i just dont have the time to finish. hear is as far as i have got with it. i have painted the new galvanized chassis. painted the bulk head the...

ye there is clear marks on witch way to put it. i like the sound of 200tdi prop convershon i take the flange splines are the same as the 200 on the 300 so i dont have to change axles or diffs?

I have a discovery 300tdi and i have a problem with the rear prop rubber keeps splitting i have done 2 in about 1800 miles any ideas why or wot i can do to stop this. i also have a 2" lift on it dont know if that is the problem.

fixed i hope i think it was down to a earthing problem the earths next to the battery on the inner arch. only cleaned the contacts up yesterday. so far so good hopefully no more no problems. thanks fore all the help guys

A spider is a bipass for the imobliser a wireing harness. and yes all the doors lock fine useing the key fob

the hazords start flashing straight away as soon as i lock it most of the time some times it taked a few min. i have also fitted a spider to the imobiliser. the car has been stood fore a cuple of years before i got it with no battery on it.

I have a discovery 1 300tdi and every time i lock it the hazard lights start to flash and the alarm sounds. any idea's?

It was shocks and springs.

Hi i have a discovery 1 300tdi recently perchased i have fitted a +2" lift and 265 70 16 tyres. after i took it fore its first outing i noticed it sitting lower on the drivers side 1" lower than the passanger side ive checked over everything i can think of everything seems fine. any ideas anyone.

yes its just one click. thanks fore the advise i will give it a go and let you know how i get on

im still strugeling to get her to crank by the key. i thought that i might have a problem with the imobiliser so i bought a spider to buypass it, and still no joy, as i turn the key to the crank position i can hear the relays make a click wich sounds normal to me. as i said i have wired a...

thanks fore the replies it will be getting extensions on the arches. just wanted to know wot i needed to do to the arches before putting the extensions on

Ive got a disco 1 3 door as a prodject i want to put my 33 12.50 15 tyres on. ive put a 2" suspension lift on and 30mm spacers im going to do a 2" body lift too. will i need to do any mods to the body and arches?

try taking the center of the steering wheel off and clean up the contacts

Check the 2 pipes that go from the oil filter houseing to the rad. some times the flexi part get perrished and is pos spraying out

thanks guys, its not the battery as ive puta new one on, and the car is a manual

thanks for the advice i will check all the plugs. i can start it by buypasing it and putting power straight to the starter via a switch but is not ideal. ive tryed a new ignition barrel but there was no change.

Hi all i have a problem with my disco 1 1996 300tdi, the ignition comes on as normal but when i try to crank it it dose nothing it sounds like there is a relay kicking in but nothing elce? The key fob fore the alarm works central locking ect. Any ideas any one????????????????

Thanks fore all the help guys. ive got 33's to go on it i know i will need wider arches to make them leagal. Ive ordered a 2" suspension lift and im thinking of doing a body 3" body lift kit off Adrenaline 4x4 too. would i need to chop the arches or would the body lift give it enough clearance?