Those wheels look stupidly **** and should be on a ****ty Saxo or some other chav crap in a McDonalds car park.

Fronts will wear first as it is basically a front wheel drive car

In this order 1st: LH front 2nd: RH front 3rd: LH rear 4th: RH rear

You should go and get your 110 covered in as much mud as possible and then leave outside the ****wits house

Its was all looking good until you put those spots on, sorry but they look real **** and would do on any car.

I would agree that Hippo's test would be the best one that every owner can carry out, it was the test I used as I found the tippex test a waste of time. I used a 1.2m bar and 8kg of weights = 45 degrees approx 20secs.

I don't think it's a problem with the fob or the immobiliser, first place I would start at would be the starter solenoid if all the electrics are coming on. First thing you need to check for is when you turn the ignition to 3 is there 12v at the solenoid, there are only 2 connections but it will...

I stuck four nails in and mine came out easy enough.

Check the water temp sensor the leads might have come off or the sensor is faulty, easy to find follow the top rad hose down and you will see it to the right of the pipe.

I got the air shears and the cut off tool for the amount i'll use them they are a bargain. They are all the same as Clarke products just rebadged.

Ok got a new pipe, it's not OEM as nothing in stock however this one is 100% better than the crap that split, this one is made of the rubber I would expect to see on any car and reinforced as it should be. The old one wasn't even the correct shape the curves were wrong which was putting strain...

It has a new engine, most likely HGF at some point so you could be correct, I'll just have to see what an OEM looks like in comparison as juiceyV8 has said.

Not sure, there were no obvious markings to indicate if it was replacement OEM or original fitted part, even as new I don't think it looks up to the job it just seemed like a very thin silicone.

Are genuine Land Rover pipes any good or has mine been fitted with a cheap piece of ****? Top rad pipe split today right at the bottom bend, couldn't find anywhere open with a replacement so bodged 2 pipes from another car together, did the job :-) The original pipe was total **** real thin...

Good job your all safe and well, hope the insurance pays out and shes gets a decent ban.

Wasn't this spam posted on here a few weeks back?

Yeah but how much did it cost you because of some muppet testing it wrong?

I've had my 99 1.8 for nearly a year now, I got it cheap as it had a few niggles to sort and needed a good service, it has had an engine change which was done at decent place but at the price I got it for it allowed for any repairs to not be a big deal. Serviced it straight away with all fluids...

Mine is plain black, i don't get the idea of pics printed on them, might as well just have big cock drawn on the back. Seems the norm if you have a Vitari you have to have a taz devil.

Do the headlights normally fill up with water on Defenders?