Hi mate first thing i would try is to remove the plug from the maf sensor if it starts, there is your problem, maf or wiring. it could be the ckp sensor. or it could be your high pressure fuel sensor or wiring (common fault). That's were i would start. i am sure other peeps will advice you on...

Just trying to be helpful. if you have the rave cd you have the technical info required. And if you are bright you can make your own tuning module, just like Ron and if you are right with people and don't take the pxxs out of them they help you just like Ron.

i can confirm that the elm 327 will read the MAF and IAT but not the fuel pressure rail sensor that's using scanxl and my landy is on a 03 plate. i don't know how accurate it is

the one without the sensor mate

tell him to get it back on testbook and diagnose it and not look for a fault. It gives live data and they can compare that data on all sensors to a chart. if not go to the MG garage just off Manchester road just after the bridge as you are coming out of your own town he is good. 10 mins on his...

what part of the country you from mate.

stevefly i had the same problems with my 2003 td4, i changed fuel filter, fuel pump, maf, boost pressure switch, crankcase filter, all the vacuum hoses. the turbo and boost pressure solenoid was replaced 2 months before these. but still no joy. i was telling a colleague about this who introduced...

Thanks for the info buggyman i have the 03 plate td4 and like you say most stuff are covered in the rave cd but its the little bits like mine only as one low pressure diesel pump which the rave cd doesn't cover. i will keep looking.

Hi TDJOHN i have hunted the net and can confirm there is something but unless you can translate russian to english these may not be of use. if some guru can translate them i will be happy to email them with the pdf files 38mb in size.

This may be answered quick but i am curious. we had the rave cd for landrover -2003, what is they now ? for such as 2004-2010 ??

if you put the jump leads on does it start ??

it is the OEM pump same problem here, took it out put it in the bin got the origanal landrover pump and its as quit as a mouse so that £100 gives your ears a rest lol. Alway buy landrover parts because you now if you dont it will come back and bite you.

Hi vitamins If it starts with the jump leads and doesn't without them it will be one of the terminals that isnt making a good contact or the battery is dead mate. Remove the terminals clean them up and try again if that doesn't do it its your battery mate.

silly answer but as it got the correct amount of antifreeze in also the thermastat may be dodgy. just a thought. on the starter i had the same problem and it turned out to be 2 contacts in the starter as chromiumuk said you can bye the kit off ebay for a£10 and 40mins later its as good as new.

Thanks chromiumuk, i was thinking more of a online retailer and new without paying main dealer prices. i have spent to much on this 4x4 already.

Hi all just wondering where i can buy a boost pressure sensor in which i mean avioding purchasing from the main dealer. Any help would be appreciated.

no problem mate glad we can sort the problem out. just one thing when you re assemble the starter make sure the black plastic steady is located in the slot it stops the spade from moving, or it will snap when you nip the contact up. its on the contact that you connect to the earth lead. easy to...

yes tom lots of thought you can do a search on here and you will be blown away by how many results you get. The problem you will have then is how to decipher all that info just like i have and trust me you will not do it in a day. people on here are very willing to help but you have the car and...

i mate had same problem with mine 2 months ago it will be the spades and the plunger inside the starter motor. dont pay £120 for i refurbed just buy a starter motor repair kit from ebay and spend 45 mins replacing them. here is the link and you get full instruction with them Freelander 2.0TD &...

hi all its me again i am still having probs with this td4 the problem is the engine managment light came on last night and it felt like i was driving a tank. so this morning i have removed the maf to check the make and all i could find was the code pbt-gf-30 is this the correct partnumber ? i...