i put a live wire on terminal 5 in relay 7 n/s fan works speed adjusts up and down what do i have to do now? is the control panel needing replaced ?

still no joy :( swapped relays checked fuses plugged in other blower motor nothing happening tried to find a positive in the plug that plugs into motor but could only find a negative any other suggestions on what to try :confused:

both fans are not working how do i check the relay is working? the relay has the numbers 1/2/3 and 5 next to the terminals

1995 p38 2.5 heater fans not working fuses seem to be ok what and how is the next thing to check

can anyone tell me how to check if my heater fan switch is faulty as i don't seem to power at the fan thanks

i am looking for the part of the seatbelt that bolts to the drivers seat

i have a P38 td as it has the bmw engine in it will the flywheel from a bmw 525 td fit the range rover as the bmw one is half the price.

hi i am looking for the seatbelt clip part the short part on the inside of the drivers seat if you have it Alan

thanks for your help will i get the spiral pins from my local land rover garage

i have just taken the gearbox out my P38 wich has a problem with the clucth and discovered the roll pins in the clutch release fork are broken is this a common fault and how hard is it to replce them

Anyone know how to wire up self levelling xenon headlight from a L322 ON A p38

yea thats what i am doing is there anyone doing a wiring loom for this upgrade

doing headlight upgrade so so need new plugs to fit new headlights

where can i get the plugs to go on the back of the headlights thanks

my friend has a 99 TD5 with the clutch slipping it had a new clutch just over a year ago his disco has a stage 2 upgrade. has anyone else had this problem? what clutch would you recommend? he has been advised to change the flywheel what do you think? is this a job that can be done by two men in...

ok thanks i just wanted to make sure

i have just received new swivel hubs for my 96 disco the only thing is that the new ones do not have a chrome finish they look like they are painted or an anodized finish are these ok or do i send them back

looking for some help to how the battery tray should look on my disco its a 1996 when i bought it i noticed that the battery was held in with wire ties but didnt notice that there was a plat covering the big hole in the battery tray. as there is not a lot of the tray left i am hoping that...

is the switch in the gear box adjustable? when i select revers the lights don't work unless i hold the gear stick across to the drivers seat. so do i need a new switch or is it just a case of adjusting the switch?

where do i get a battery tray for a 96 disco? as it has rusted away i think the battery has leaked and has never had the acid washed away