Hi did mine last year on my 300tdi 60 sqwid inc new drive belt so not a big wad of cash got it from local m fators of the shelf

Fixin freelander get rid asap:mad: :) now got a disco better till water pump went :( :) but better now.

Just done my TD3 no probs you dont need to remove the fan just the pullys obv water pump and pwr steering its tight but not 2 bad 2/3 hours Good luck

Hi its at the front l h side you will need to drop the splash guard an un bolt it bewhare of oil spill from it use a cork new ones are cheap abt £5.00 . Did mine just bfr the head gaskit went. Rob

I have seen a disco for 2k but it has some rot holes where the front wings meet the sills only small holes will this mean an MOT fail? You can only see when the doors are open

Thanks that a big help Rob

Ta Very much dont mind a bit of **** taking if you cant laff at ur self time to give up. now got two discos in mind anyone know how much rot on front wings is a mot fail on a disco ? Rob

Hi foud one on a test drive that did it only would take key one way new barrell?

Hi I'm thinking of gettiing a disco and have found two. One is on an "M" plate, good body and will need some tidying to stop the rot, but ok at the mo. Steering feels stiff but otherwise runs well, but not as free reving as others I've tried. The other is an "R" plate, better chassis but has...

Thanks for all the help got the b***** off now with irwins fantastic kit!got hole in head car not mine so will av to replace then its going . Think Iv fond a nice Disco with full servive hist with it 2.5 TDI 3. Cool Thanks again for all the advice. Ps bolt looks good in pin stripe Chears :)

Thanks for all the ideas may try a weld but i only have an ark welder would that do it as i dont want to meld the aloy on the head! Trying to find an engin at sencible money then get rid of it an by a disco tdi But thanks any way. Any one know a good mec in leeds west yorks? Chears Rob

Thanks tempting to use a gall, but no the star drive have almost gone it looks like its been over tightend when it had its last gaskit done I am tring to fit a new head gaskit but its now looking like a new engine. Ta Rob

Any ideas how to get a striped head bolt out of my freelander?

Hi it not a big job to change the gaskit 30 mins or so RobD