Carl at Castleford 4x4 Centre, Lock Lane, Cas. 01977518864 would most certainly do it for you if you can get it over there.
Carl at Castleford 4x4 Centre, Lock Lane, Cas. 01977518864 would most certainly do it for you if you can get it over there.
"Irwins" nut/bolt socket
Buy 'em as a set at any good tool merchant (old fashioned hardware shop)
They have a helical cutting edge in the socket that bites into the offending nut/bolthead as you turn it in an anticlockwise direction.
Extremely good, but pricey - fit both metric and imperial
Buy 'em as a set at any good tool merchant (old fashioned hardware shop)
They have a helical cutting edge in the socket that bites into the offending nut/bolthead as you turn it in an anticlockwise direction.
Extremely good, but pricey - fit both metric and imperial
Northern Irelander
Well-Known Member
only thing is they are neither imperial or metric, but new generation Torx heads, E12 female socket IIRC
Fairly good chance it will still work.
As long as you can tightly fit one over the head of the bolt it will bite in as it is turned, and will take considerable torque.
They don't have flats inside the socket, but helical cut "blades" which work with standard right hand threads. The sizes in metric and Imp are quoted more as a guide for the size range they'll fit over.
Have sucessfully removed heavily rusted & completely rounded nuts and bolts from agricultural machinery.
Really impressed me as there has been nothing I have not been able to remove with these, one of the best tool investments I've ever made.
As long as you can tightly fit one over the head of the bolt it will bite in as it is turned, and will take considerable torque.
They don't have flats inside the socket, but helical cut "blades" which work with standard right hand threads. The sizes in metric and Imp are quoted more as a guide for the size range they'll fit over.
Have sucessfully removed heavily rusted & completely rounded nuts and bolts from agricultural machinery.
Really impressed me as there has been nothing I have not been able to remove with these, one of the best tool investments I've ever made.
Thanks for all the help got the b***** off now with irwins fantastic kit!got hole in head car not mine so will av to replace then its going .
Think Iv fond a nice Disco with full servive hist with it 2.5 TDI 3.
Cool Thanks again for all the advice.
Ps bolt looks good in pin stripe Chears
Think Iv fond a nice Disco with full servive hist with it 2.5 TDI 3.
Cool Thanks again for all the advice.
Ps bolt looks good in pin stripe Chears
Optimus Prime
Well-Known Member
Ps bolt looks good in pin stripe Chears
kinell, congratulations to ya, first newby not to cop a strop when having the p1ss ripped.
welcome aboard
only MOT fail on off side wing close to brake servo.
