Thanks but it really struggles when it's cold to fire

Afternoon I'm looking at putting new glowplugs in my 300 TDI ..I've tested them all dead . Thing is they were never wired up and I can't find any wire or a relay .. What relay ,size wire and fuses will I need I'm going to rig it to a switch instead of ignition barrel ..any help out there

Yes each wheel locked when in difflock and low ratio road use but not in high ratio road use

Will this identify the box if I need a replacement

Right clear head this morning another look at it all the wheels lock up nicely in difflock put it into normal high for road work nothing happens into low it crawls so suspect transfer fluffed on the high side ..it's ratio is 1.211

Just the front two that happens with

Yes exactly

Right I've jacked the bugger up it's in difflock and reverse both wheels spin forwards and the prop jerks now and again ...is it both bloody half shafts lol

Righto I've jacked it up .it's in difflock both front wheels turn freely it's also in gear and every now and then front prop jerks

Afternoon . Righto drivetrain issues ..pulled up at a junction ..pulled away and bang ,towed it back home 🏡..it drives in difflock but. Not in normal high low ,front prop just spins away happily ..is it half shaft issue or have i fluffed a transfer box More pounds notes lol . Tia

Afternoon . I've a thud on take up of drive I've checked the axles ,prop shafts bushes etc all good Beast is a 300 TDI with r380 box am I right in thinking the transfer box is lt230 .. Tia

Will do cheers .

Hi guys ..my 110 200tdi .has started howling when the revs are peaking for a gear change upwards ..normally happens in 3/4 gears .drop the revs back a touch and it goes immediately it's quite deafening .turbo is kicking in nicely and you can just here it working at times under the other howl...

cheers guys will keep you posted

well another gearbox I'm afraid

ok guys whilst reversing tonight had a loud bang and lost reverse and all forward gears .put it into difflock and got it back home what have I broken please ?????

hi guys new to landyzone some great reads on here .cheers

ok guys .took the crankcase breather off was gunked up possibility of the back pressure but it had water in .head gasket you think ????

sockets nd spanners out tomorrow kets see what weve got