is there any pictorial on this.

I got mine down in Nov 09 to India and its 388 kgs inclusive of the wooden packing, if that helps.

Guys, Need the part numbers of the following Defender 200tdi Turbo hoses: (normal rubber ones) Turbo Outlet to Lower Metal Pipe Upper Metal Pipe to Inlet Manifold Lower Metal Pipe to Intercooler Inlet Intercooler Outlet to Upper Metal Pipe where can I buy the entire set? Would...

Yes the loom of what ever is left is all hard and brittle. the previous owners (am the 4th) have gone and cut the loom in many places. Hence I need to replace it with a new loom.

I have a 1990 Defender 110 with a 2.5na and am replacing the engine with a Defender 200tdi engine. I thought I might as well replace the main wiring loom as I am removing the entire engine, gearbox & transferbox. Will also get a chance to tidy up the wiring in the engine bay. Just a little...

Sorry if this is a dumb question: Where is the switch for the rear wiper & the heating element on a 1990 defender 110. Also there are a few switches on the RHS dash, one is the hazard, the second is the cabin light, the third(???????) there is a small white knob on the RHS steering console...

Doesn't LR do the rust proofing already for all new vehicles?

try L. R. Series - specialists in land rover, land rover series and range rover - gearbox, axle, transmission parts, spares and major units, have been using them quite often for shipping my parts to India. However had some issues with freight. They never ship anything above 2kgs by Royal Mail...

Should be anywhere between 350 kgs plus.

Thanks for the info. Replaced the faulty one with the PRC 6663, its stamped on the transmitter. Now the temp very gradually climbs up to 10-15% of the white area. Will do another long run and check. Sadly threw away the old transmitter. Will order a few 6663's and check. Funny as before the...

Hi! I have a 110 2.5NA, recently my water temp sensor packed up (thanks to mechanic who turned the flat blade and destroyed it). Hate driving without knowing the temp of the engine. The temp gauge is working fine though. Replaced it with PRC6663 - WATER TEMPERATURE TRANSMITTER and found that...

Just saw diesel dripping from the big nut with a pipe in the centre from one of the injectors and tightened them all and now there aint any leaks from the fuel delivery pipes but still leaking from where the injectors sit into the head, especially from the two bolts on either side of each...

leak is from below the injectors.

Have a Def 110 with a 2.5NA and there was diesel leaks on all the injectors. Got genuine steel small washers and the copper banjo washers and replaced all of them & still the injectors (new) are leaking. Get a lot of diesel smell in the engine bay. Any idea's on how to stop this leakage.?

I had a problem of leaking oil from the rear crankshaft bearing, which is still there and also oil coming out from the breather pipe, changed the gasket on the breather and no more oil coming out, even though I have some back compression. The oil leak at the bolt in the middle of the rocker...

Thanks for the info.

THanks, Not yet got the MC to work, will try again

Looks lovely in red. Very nice. Just a little tender care will bring it back to a great condition.

Just changed my master clutch cylinder from a local replacement to the original OEM from Land Rover and noticed that when I had the local one, the clutch had a huge travel while with the new one the clutch travel is less and get only activated halfway down and not like before which was all the...

Hi! Guys, Have a 110 2.5NA & I need to know these part numbers: Does anyone know this part number: Its the brake switch which is located at the back of the brake pedal box. Its the plastic switch with a rubber backing in the picture. Also need the part number for the bonnet locking...