I got another video to explain rather than typing does not come across right typing

Ok I was only saying what I am going to do. Crumple zones mean weak zones designed to fail. I am competent there is only tubes inside the frame at the power steering box my chassis will be fine . I welded the plates on to the steel beams in my house which are holding approx 13 ton every day ...

I've just built a house myself. Doing this is easy I am copying what was fitted and the position of the brackets. The reason your saying people have a hard time lining it up must be the chassis is made slightly out of position. A jig is only for speed so you dont have to measure. I am...

Why not I will only need 2 sheets of 2mm steel and a couple of days. It will take longer to cut out the shape as my plasma cutter has went . I'll just cut the shape with 1mm cutting discs 4 off and once that's done 4 strips of 75mm and that's the legs done

Thanks I will post pics of most things its axel off tomorrow and cut off a chassis leg

Lol

I'd well I can tell you stories about that not just landrovers. To prove a stolen car or a ringer they need 10 points like say someones car has a scratch on the glove box and a hole in the side of a back seat ect. For keeping the reg what they do is they look at the date stamp on thing like the...

It took about 1 shift 8 hours

Well ok I think your right. New chassis it is then . My plasma torch just went timing eh. I am going to build a chassis as I dont have a spare 2 grand after building this house extension. I recon it will cost about £90 for the sheet steel £160 for the dipping and about £300 for all the brackets...

Hi guy dont know what to do with this chassis advice if yous can. Thanks andy the video will kinda explain

I hi i must be missing something where do yous all get the parts nos from surely you dont know them off by heart. What's the book called it would make it easier ordering parts Cheers andy

It's a 22f box

No they weren't gkn they were cheap. Must just be that. It's the only thing I can think of. I never seen bearing cap fall to bits like that but then I dont usually use a press . I not got a vice fitted in the new garage yet so I dont /have ever used a press maybe to much force cap caught at a...

I was fitting a new front uj and I cant figure what's happening 2 caps and clips on no prob the fitting the 3rd cap and clip ok but the other end needs pushed down a bit to fit the clip but when I do this with a press I am pushing the end of the caps out ie breaking them the only thing I can...

Thanks

I scratch the rubber one I had a look at the oem one it was not really damaged just a slight kink flattened out easy with my hand so I had a go at fitting it this time I tried an idea I had and it worked fantastic made putting the seal on a doddle. Get 3 10mm screwed rod and 17mm nuts place a...

Hi does anyone know or where I can find the part no for the shims for the input gear. I dont want to buy an Ashcroft kit I will just buy the one close enough from landrover. Cheers andy

Right I just mating the 200tdi to the gear box fitting a new paper gasket and new crank seal tried a oem one kinked it. I am thinking those rubber looking ones err2532. Anyone used these as I int want to take it back out when it's in. The orange rubber one looks ideal if it seals . Anyone good...

Right I know what I going to do. Valeo 130 clutch. DA5551G that's just the standard one. Anyone know 130 clutch part no?

Thanks guys I just buy a Valeo clutch DA5551G .yous are right it's not worth the risk but then I keep thinking baulk rings. I just go to my local motor factor and buy there oh I dont know now. Indecision worse than a woman