Hi All, Been running my Defender 200TDI CSW on Biodiesel for last 2 years no problem. Did do the usual 50/50 normal diesel in winter until forgot last couple of weeks, NOOOOOOOOOO! With the freezing weather think it's gone thick and blocked fuel filter(0r crappy last batch of biodiesel...

Hi Joe, Thanks for link. Might be a "Bulkhead Too Far!" perhaps should keep looking for good earlier donor! Thanks again Jonah

Good Evening All, Would a TD5 Bulkhead from a 90 be a suitable replacement for an iffy 200tdi 110 CWS bulkhead? It has vents so would I need to modify or would it go straight in? How long should it take to change? Ta Jonah (Still Loving My Deafener):confused:

I had similar last week, thought the bearings had gone, but it was the mudguard on inside of hub, which had rusted through and was rubbing against disc on my 110 CSW. If it's bearings, try www.lrseries.com very good prices. Could just be the sound of a 1990 Deafener!!!! Hope this helps. Jonah

Good Evening "Team Landy", Just bought a newer set of steel wheels with Michelin xpc tyres for my Landy 110 CSW. Wheels have small rust spots and don't want these to develop so do I:- a) Leave them alone and stick them on Landy? b) Spray them with Clear Waxoyl? c) Brush with Clear Waxoyl...

checked with local motor factors, there's a 2 week delay on "Elbow Grease" and "Buckets of Blue Sparks!" so placed order!!!!:hysterically_laughi

Hi, Thanks for responses, thought the "rounded nut tool!" suggestion was a similar suggestion to "go to the stores for a 'LONG Stand!'". Did a little looking around and bought a set of Irwin ones from ebay, great price £12ish inc delivery (screwfix £21.99). BNIP IRWIN bolt-grip 5 Piece...

Hi All, Did a quick search and couldn't find the answer so here goes:- Trying to sort a leaking inner hub oil seal front nearside wheel (deafener 110 - 1992). stripped down to point where I need to remove brake caliper, bought 13mm Bi-hex socket to remove securing bolts. 1st bolt piece of...

Thanks for responses. Fixed - Cable to battery, fuse, thermostat, fan and earth as suggested. Job done. Thanks Jonah

Bought on the understanding that it was easy diy and thought it would be easy to get wires to fuse box!

Hi All, Fitting kenlowe fan to my Deafener 110 200TDI and am stuck! I've fitted fan and thermostat probe in radiator, now where the F*** do I connect red and green wires? how do I get them in to fuse box if this is needed?????? It's raining and I'm supposed to be over at outlaws to pick up...

Right had a look around and found one or 2 good priced lubs. Anyone know if Carlube is a good brand??? or any suggestions on brands? Ta Jonah

"IT'S ALIVE!!" My clock works with the lights on and lights up. It's all mod cons in my Deafener now. As suggested, moved the bullet connector for earth into another earth connector and hey presto a working clock when the lights are on and it's brill at night can see what time it is...

Thanks for replys and advice. Should have time to do tomorrow so will let you know how it goes. All the BREAST!

Hi, Will Land Rover ANR1689 fit my 1992 Defender 110 200TDI CSW without spacers??? Ta Jonah

hows the best way to earth it?

Thanks for all replys. Will pop into a couple of local spares places to check prices.

Hi All, Just wondered if it was worth upgrading my Deafener 110s speakers? Would I hear the radio any better above my 200tdi and if yes, which speakers ideally direct replacementd? Thanks Jonah

Both very good answers!! My local farm shop has banned me, caught trying to nick diesel out of tractor!!!! Can't use website as i'm at my monthly purchasing limit with them!!! Might need to go down the high street store root, any suggestions?

Evening All, Looking at doing oil change on my Deafener 110 200TDI and wanted to know the best place/best price to buy lubricants? I'm ok for engine oil 20trs for £50 (Chevron/texaco Supreme 10w40), but wondered what alternatives I have for gear box oils etc. Don't want to just walk into...