jonah

Active Member

• May 29, 2010

• #1

Hi All,

Fitting kenlowe fan to my Deafener 110 200TDI and am stuck!
I've fitted fan and thermostat probe in radiator, now where the F*** do I connect red and green wires? how do I get them in to fuse box if this is needed??????

It's raining and I'm supposed to be over at outlaws to pick up littlens!!!!!

Ta
Jonah

 

S

Sean

Banned

• May 29, 2010

• #2

didn't you think to work out what wire goes where before you started ?

not that you need a fan .......

 

MudHunter

Active Member

• May 29, 2010

• #3

you wanna take that proba straight out again n just have a switch in the cab. much easier you wont need the fan most of the time esp in winter just keep an eye on the temp guage

 

jonah

Active Member

• May 29, 2010

• #4

Bought on the understanding that it was easy diy and thought it would be easy to get wires to fuse box!

 

S

Sean

Banned

• May 29, 2010

• #5

jonah said:

Bought on the understanding that it was easy diy and thought it would be easy to get wires to fuse box!

Click to expand...

it is, there's a big hole at the back of the FB that leads into the engine bay

am assuming you've found the FB ?

 

MudHunter

Active Member

• May 29, 2010

• #6

cant you take a live feed from somewhere else with an inline fuse n ground the other wire?

 

jonah

Active Member

• May 29, 2010

• #7

Thanks for responses.

Fixed - Cable to battery, fuse, thermostat, fan and earth as suggested.

Job done.

Thanks

Jonah