Hi All Just received rear anti roll bar ball joint (NTC1888) from Paddock and was surprised to see a Karsons Automotive Components box and part? I did buy after market part, but first time I've seen the manufacturer. Any one used this manufacturers parts before, experience and how they...

Hi Foxyred, You are a legend! Once someone points you in the right direction was easyish! Only problem I had was existing e-clip was very rusty and then fell between door and strengthening plate, NOOO! No problem, I thought, went to local Huddersfield Independant, but "sorry we don't do e-clip...

Hi Foxyred, Thanks for info. Will try tomorrow after buying a new linkage clip as the old one fired off into the grass, DOOH! Hope it's as easy as you say, Fingers crossed! Jonah

Hi Alex, OK you were right, using chisel and hitting became last resort, at least sorted now. All this to save garage labour charges and mark up on parts, worth every penny/minute! My Mrs writes off at least a day every time I say it's a quick job, she's right as usual! Good luck with the...

Hi All, Managed finally to change ignition on my Defender 110 2008 Puma so the key no longer falls out when driving!! Now need to change door lock barrels and looked at all the threads on removing screw, easy peasy! NOOOOO! The new locks on my Puma do not have a nice wee screw to remove. New...

Hi All, Finally sorted with new Clarke's rotary tool to replace now dead Black and Decker one! My method, which may help future Puma ignition changers, with the limited space due to new dash tray under steering column:- 1) With my new rotary tool managed to cut through right hand bolt. 2) Cut...

Hi Alex, Thanks for response. Not enough room with the puma dash tray/fuse box below steering column to do much with slots and screwdrivers. Reluctant to hit column/collar as don't want to damage column. Think I'll have to persist with a new Clarkes rotary tool with flexible extension, original...

Hi All, I need to replace ignition barrel and searched for suitable solution, lots if you have an older Landy without "new" 2.4tdci dash, with shelf! Had steering cover, wheel, etc. off, but can't drill out bolts as suggested, fuse box and shelf in the way below steering column! Tried to use a...

Like the idea of extra legroom, have a 110 Puma SW, but am concerned that moving chair backwards would cause my shoulder even more problems with door pillar! I'm 6ft 4".

Evening All, Looking at adding a High Level Rear Brake Light, which was missing when I purchased the Landy. Have 2nd hand light assembly, but one of the connectors which is fixed to window is missing and need a replacement and advice on how to attach it. I've attached pics of existing connector...

Hi All, Reverse & Fog Light fitted now, used 2 pin waterproof connectors via Amazon worked a treat. Thanks again for all responses and help. Jonah

Hi All, Many thanks for advice and info on flasher unit relay. Emailed Wipac and they sent me 2 New Flasher Units, delivered next day, which I thought was great customer service. Installed new one and YEAH the indicators flash as they should. As suggested turned knob on back of relay until...

Hi All, Thanks for quick responses. Have, as Tony suggested, turned relay knob and trailer light off now thank you. Think it must be a dodgy relay as moving knob either way has no effect on slow rate. Not timed, but flash must be on for 2-3 seconds then off for a split second and then back...

Hi All, Just tried old flasher relay in, which is a Wehrle 13 201 103 Flasher 12V 2+1(6x21)w, not too sure if this is a standard Flasher Unit relay or one fitted to accommodate tow bar/trailer wiring? With old relay in, no green trailer light, but flashing "Mucho Rapido!" Any help/advice much...

Hi All, Why is it never easy? Had a set of Wipac LED indicator, side & brake lights for my birthday and finally gots some "Me & Landy Time!" Couldn't find anything on which Relay to replace with new variable relay/flasher unit, so put hazards on and removed/replaced relays in turn, under...

Hi All, Need a front wing upper for a 2008 Puma, does it matter if it's a MXC9343, LR020621 or ALR9936 or are they the same profile, holes for lights etc in same place........? Your help is much appreciated. Jonah

Thanks Doey68, will check hoses in the morning, fingers crossed its just the Valve Assembly which I've now ordered. Told the neighbours it's not the Landy, its the crappy plastic Italian made valve that let me down! Can't believe how defensive I am about my Landy and telling everyone that it...

Sorry Part No. valve assembly JQD500080.

Hi All, Have now found part no. its #115153, was hoping as its plastic shouldnt cost too much?? Well £77 later "Landy Gen Part!" and fingers crossed I get it quickly from Land Rover Parts & Spares, will advise how quick they are. Jonah

Hi All, My Landy decided it was hot and tired on the motorway today with coolant leaking from the following valve/plastic part. Presume it got stuck/failed, any other suggestions? Any idea on part number for me to replace it, your quick response is much appreciated as I want to order it...