he has tried it with the original rad, plus an extra home-made st/st expansion tank in the valley , which worked, but he is now fitting a massive four barrel carb on it, and there is no room for the st/st tank, so he wants to put a thicker radiator in, but with roughly the same width and height

hi all a freind of mine has a 1974 triumph 2.5 pi, he has fitted a rover 3.5 v8 into it, but the original triumph radiator is too small water capacity. does anyone know the dimensions of a classic or a p38 radiator, to see if there is any way he can fit one in its place? alan

it had better be normal, mines been like that for last 8 years.lol

just out of curiosity, what about buying a small (exhaust) cotton reel, with the right size thread, as the original bolt , holding the pump to the bulkhead, remove the bolt, screw in the cotton reel, fix the pump back on with a nut and washer? just might make the sound less inside( same as the...

as above, there is a stud after the back box and before the exhaust pipe expands to the end orifice. i have looked around and cannot find anything to connect to it, the old exhaust(removed) had nothing on there either? is it the earth for the exhaust, and if so, where is it supposed to connect...

hi all, when i originally fitted my front lamps and switch,they did not work, as yours the light came on in the switch, but no lamps lighting up, took it to my local indy, plugged it in to laptop, activated the lights through the computer, still no lights, checked the connectors, behind the...

as above, i ordered an exhaust from them yesterday, it arrived today at just after 10.00 am. it states 4-6 days, i was expecting to have to wait until the weekend before it arrived, on their confirmation reply, it says delivery will be tuesday, i was expecting next tuesday, not next day,wow

i too, have found out, that the p38 bushes are differant from the classic ones.i had to make a special tool to replace mine.i rolled some stainless steel into a cone, then welded down the seam, then cut the top off the cone to have the inside opening the same size (or slightly smaller) as the...

have yoy changed the fuel filter, if yours has got one that is replaceable?

if you want a good laugh, go to webuyanycar.com i did, 1995, 4.0se,160k miles,new engine @ 120k, full service history, 3 owners, lpg conversion, 11 months mot, their value? £660

(passenger)drivers side door poorly fitted(left hand drive)final picture

tide does better than me. it comes twice a day.lol

i used fairy liquid, water and a piece of wire with a cloth wrapped around it, cleaned them up a treat

i had the problem with the grease gun , when my first miniature gun had broken, i found out that you cannot buy a smaller end , but you can, grind two opposing edges off the end, no more problems since

for sale on e.bay, from a garage??????????150438814797

as i found out, to get the little piece, that the cable clips too, that raises the roof, you have to buy the whole r/h or l/h assembly at £80 odd quid, but at least you do not need to fit the whole lot, too get rid of "sunroof not set" you have too, press the sunroof button to open, keep pressed...

try reading this, it may help. http://www.landyzone.co.uk/lz/f10/sunroof-problem-96542.html

what , exactly do you mean by "but it won't go all the way up and down" does only one side, go up? when it stops, is it sat down low? even both sides? "

when i bought mine, the headlight wipers/ washers , did not work, i found that the fuse had been removed, i replaced it. next time i used the screen washers with the lights on, the drivers side wiper and both washers just kept on going , until i removed the fuse. the switch that stops them , is...

surely , if you suck out the fluid in the reservoir, you leave the old stuff in the pump, pipes, and box, what about, putting a small tube, onto the steering box bleed nipple,undoing it, and run the engine , turning the steering,keeping the reservoir topped up? would that work?