I wouldnt have thought so any way mines a series on a rang rover chassis and im insured

there is a pic on here somewhere of a 110 that has the back kitted out proper mint dont know who it is but some one will know the pic has his wife sat in the back and taken from the front seat area :)

I would get out my tape measure Thats a good price for a galvi ghssis if you can chop and weld im dam sure you can make the body fit, it cant be that different As far as insurance goes you are doing a land rover chassis swop

Yes my breakdown cover has built in legal cover so it knocked About £30 off me landy insurance I left my separate car insurance as is

stainless steel exhaust y piece | eBay

my suggestion is double sided tape :) the left over glue will be easy to get off

sell it to some one who wants a standard motor It would be wasted on me

Check engine and gearbox mountings front radius arm bushes on chassis To start with

Thats not realty a straight forward question with a straight forward answer If its a free lander you want have a good read in the free lander section to see what your getting yourself into There is an intro section if you plan to stick around

You have over 50 posts so you can put them in the for sale section on here for nowt :D

Thats wot i thought he might mean untill he said he was gunna cover the hole vehcle with it :D good stuff for rattly doors and stuff, sticks like s**t to a blanket,usually one chance only to put it on It can be a bit heavy as well Any way its nothing to do with me ,tell us how you get on mate :D

cutting the wire sounds abit extreme Did the park brake not come off coz the battery was flat due to you Alt failure ,if so would putting a jump pack on enable you to release the brake, Shirley the brake is not designed to come on with a flat battery. Is it rigged to the security system dose...

Ive been about abit but im not sure wot stuff your on about any pics ,links or owt :confused:

Nearly 7G It needs a bonnet a rear seat (that will take some finding) and you have to put the engine back in, You dont know what butchery has been done in the engine swop or if theold engine is any good Shirley theres better ones for that price Number 122 off the line is neither here nor there

I see wot you mean now As some one said putting a air con pump back on until you remove the ace looks the cheaper option then again if you get an idler you can use it again on another motor if need be

Checking continuity with a multi meter is a good start but a half worn through wire will show up ok Have you visually checked all wire relating to that coil pack one good way of checking a wire is a 12v feed and a bulb (If the bulbs bright etc) stuff has to be disconnected first so you dont put...

I know exactly what you mean buy having the drive belt sufficiently around the bottom pulley for drive As you have removed the ACE pump and Air con pump there is a hell of a lot of strain taken of the drive belt As said will a shorter belt defo no do? obviously i cant see how the bet runs ,I...

Shirley you cant go wrong with an exhaust from britpart

Random (Im trying to sound young and with it ) :D

Dont think your self to much a fool Looking at your first photo (very nice and clear) We all mist the starter motor in the shot with the no were to go earth strap, and didnt click If you need to no owt else we'll try abit harder :D