Winu

Active Member

• Jun 25, 2015

• #161

So, its finished

Lowered by 30 mm also suspension is stiffer - Full MY'04 sport suspension is fitted with Polybush Dynamic bushes.
18" LR Sport rims in chrome, with upraded brake system
New gen LR SS nudge bar from with new SS side steps, also gen fog lights fitted.

Under bonnet we have Ultra racing strut brace, full SS intake system and Alisport Intercooler on front. EGR is also removed. New injectors from 2006 model are fitted. It also have turbocharger with larger compressor wheel.
Car is before final remap but results are very noticable.

Now time for interior jobs, soft top fitting ect.

 

LandyMan

Well-Known Member

• Jun 25, 2015

• #162

NICE!!! Good job

 

Winu

Active Member

• Jun 25, 2015

• #163

Thanks,

Can't wait to see it with soft top .

People very like it. When today we're back with both FL's and RR in small convoy everybody looked back :bounce:

 

R

Rscabrio

Member

• Jun 26, 2015

• #164

Whats the upgraded brake system dude ?

 

Winu

Active Member

• Jun 26, 2015

• #165

Lucas L20 Brake callipers, StainlessSteel brake lines, Black Diamond Vented and grooved brake discs, EBC SUV 7000 pads, ATE TYP 2000 high performance fluid.

 

tonytherunner

Active Member

• Jun 26, 2015

• #166

This is the new BLACK SPIRIT

 

Winu

Active Member

• Jun 27, 2015

• #167

Yep, that's a good name for it . It's not remaped yet, but can beat stock FL sport 2006 , stock Td4 2002 and 1.8

Both in home now:

 

Alibro

Well-Known Member

• Jun 27, 2015

• #168

Really nice work here. Well done.
Just wondering why you go to so much trouble and effort, is it just for yourself or will you use them as show cars for your business?

 

Winu

Active Member

• Jun 27, 2015

• #169

Sometimes those are used for showcars, but I do this just for fun and pleasure of creation.

 

htr

Well-Known Member

• Jun 28, 2015

• #170

Winu said:

Sometimes those are used for showcars, but I do this just for fun and pleasure of creation.

Click to expand...

+1
Like I say to the misses - I don't play golf [yet], or rugby/soccer/cricket... don't drink [much!], not a hunter disappearing off into the mountains every weekend, not a frequent skier now... So it's my only vice at the moment. I too get a lot of pleasure/enjoyment/satisfaction working on it.

 

Winu

Active Member

• Jun 28, 2015

• #171

Yep, a lot of fun with those especially when parts don't match

Now it's time for do some wiring looms for new toys... ordered 120 meters of wires in various colours... LoL

 

Winu

Active Member

• Jun 29, 2015

• #172

Preparing it to summer open top mode

Boot cover is on place

A bag for glass also...

So... only left to remove hard top and put soft top... next week

 

R

rich31

Active Member

• Jul 7, 2015

• #173

Hi mate just a quick question was there a reason you did the air intake pipes in stainless steel instead of aluminium as i was under the impression the steel would get too hot?

Great work mate too, you have given me so many ideas too now, thanx

 

Winu

Active Member

• Jul 9, 2015

• #174

Use SS because those were on the shelf, and better looks. In L-series i got polished aluminium ones, and both works great.

Intake temps (before change IC) are lower on SS pipes about 5-8 deg. Those get hot but also get cool very quick when fans working. So no worries about temps

I'm happy that you like it.

 

Winu

Active Member

• Jul 11, 2015

• #175

Well, some part of sound proofing is done...

On the standard, there is... nothing...

Inner roof panel

Second layer on inner panel - poliurethane foam

Outer roof panel

Results are noticeable. Less roof trim squeak, less wind noise . Better results will be when side panels and doors will be done.

also finish my front:

Now looks like it should with gen nudge bar and hella luminators

L series got all SD stuff repainted

 

Epicuser

Ex Freelander Owner

• Jul 12, 2015

• #176

Very nice.

Do I miss mine?

In short, no.

 

Winu

Active Member

• Jul 14, 2015

• #177

fitted gauges in centre console as planned

 

Winu

Active Member

• Jul 24, 2015

• #178

So... a 15 hrs of hand polishing and detailing...

Lower part of pic shows how it looks before - Scratches, scratches... and scratches.. Top of pic shows how it looks after using Poorboys World SSR 2,5 and SSR 1 on "German" polishing and cutting pad. Most of damages are gone. rest of it can be removed by polishing machine, but this will be done by Pro people. So, after 15 hours whole body is done.

Then I use APC to remove all dirt and polishing stuff leftovers. Next step is Poorboys Blackhole, for better and deeper colour, and Natty's paste blue wax for finishing.

 

Winu

Active Member

• Sep 12, 2015

• #179

So, after fitting new MAF (magneti marelli) instead of three other Bosch Mafs it finally works. Smoke is no more present (sometimes it make a "puff" of black one, but turbocharger is not tuned with new IC yet). Difference was instant noticeable after fitting it, but after 200 km ride ECM learn how to use it, and another improvement has been present.

So, just need to fit thermocouple in exhaust manifold and it can be properly tuned. It finally arrives from Australia.

 

Winu

Active Member

• Oct 8, 2015

• #180

new toys for winter:

Got brand new heated windscreen harness with switch - just plug and play option
EGT is now fitted in manifold and working fine. Soon we should have some dyno results.

And here we got some backstage photos from LRM session . You can read about both cars in one of next issues.