haha i will use a six sided socket when i go back out might even treat it to an actual 9/16. but what im trying to work out is the deal with the stud coming out not the nut coming off! the 4 im on about are clearly stud and nut lol

also for the record was open end spanner :p my ratchet end wouldnt fit haha
 
not my picy :p was to show what studs/nuts i was on about. so yeah whats the deal with them studs if they come out haha
 
1/4 inch extensions are not a problem or the adapters if i wish to use the bigger bars further down the line and if i really want there is always the impact gun lol. im not concerned about getting them out im concerned that i have no idea if taking the studs out instead of the nuts off will be an issue or are they just like most the studs on the block if they come out clean them remove the nut and put them back (or be lazy and put them back in the one they came from with the nut on like a bolt lol)
 
Magicgrotto said:
ceffyn IF they are studs I will stand on mi head at the top of a Welsh Hill & Pi*s Paraffin !
Click to expand...
you sir are a legend went back out to remove the one i thought was a damn stud can see now what you mean its a bolt from the inside with something to retain it lmao i was tuning the "play" it had and thinking it was coming out.

gonna stay silent now while i find my 6 side because this time the tool that was an issue was me not a metal object in my tool box haha
 
after much fighting got the damn thing off one of the nuts is shredded (anyone know what size and where i can get one). had to get it with a spanner in the end.

took it for test drive and the clunk/problem is very much still there front prop not being taken off yet though cause as usual its raining again here :(
 
Magicgrotto said:
Am i SPEAKIN RUSHEN ?? Have you given that A frame ball joint a good WIIIIIIGLE ??
Click to expand...
yeah i give that a shove, wiggle and shake it seems ok but getting dark by time i got to it so will check again when i get under to put the prop back on (wont be tonight its pi$$ing down yet again)
 
neilly said:
Not sure about the language, but it does look like your typing finger has tourettes.....:p

Cheers
Click to expand...
my fingers suffer with almost as bad a case of tourettes as my brain does. unfortunately i haven't mastered the filter between my brain and my mouth/fingers :)
 
ok so the obvious i have to remove the drum to get in and change the bolts but how much of a pain in the ass is changing them actually going to be!
fighting a never ending battle and losing at the moment so might as well be prepared for the worse case.
 
You must log in or register to reply here.

Similar threads

heggars
Disco 1 Turbo air leak under boost
Replies
2
Views
652
heggars
heggars
J
Discovery 2 td5 failed r9 to fuel pump
Replies
11
Views
575
Jambo2301
J
Rickspark
Oil Pressure Relief Valve - What should it look like?
Replies
3
Views
608
Rickspark
Rickspark
M
Drove through 2 feet of water, next day, clunking/sputtering when turning left/right slowly?
2 3
Replies
45
Views
2K
Stanleysteamer
Stanleysteamer
L
(SOLVED) - occasional clicking noise accompanied by power loss on acceleration during turbo onset
Replies
17
Views
2K
Wizard2003
Wizard2003